Jumper Settings for 5DVX

Jumper Settings for 5DVX

FOR INTEL PENTIUM / PENTIUM WITH MMX TECHNOLOGY CPU

CPU Type	JC1	JC2	JP8	JP9	JP6	Bus Frequency MHz
Pentium 75	2-3	2-3	2-3	2-3	1-2	50
Pentium 90	1-2	2-3	2-3	2-3	2-3	60
Pentium 100	2-3	1-2	2-3	2-3	2-3	66
Pentium 120	1-2	2-3	2-3	1-2	2-3	60
Pentium 133	2-3	1-2	2-3	1-2	2-3	66
Pentium 150	1-2	2-3	1-2	1-2	2-3	60
Pentium 166	2-3	1-2	1-2	1-2	2-3	66
Pentium 180	1-2	2-3	1-2	2-3	2-3	60
Pentium 200	2-3	1-2	1-2	2-3	2-3	66
Pentium 166 MMX *	2-3	1-2	1-2	1-2	2-3	66
Pentium 200 MMX *	2-3	1-2	1-2	2-3	2-3	66

FOR CYRIX/IBM CPU

CPU Type	JC1	JC2	JP8	JP9	JP6	Bus Frequency MHz
Cyrix / IBM PR120	2-3	2-3	OPEN	OPEN	1-2	50
Cyrix / IBM PR133	1-2	1-2	OPEN	OPEN	2-3	55
Cyrix / IBM PR150	1-2	2-3	OPEN	OPEN	2-3	60
Cyrix / IBM PR166	2-3	1-2	OPEN	OPEN	2-3	66

FOR AMD-K5 CPU

CPU Type	JC1	JC2	JP8	JP9	JP6	Bus Frequency MHz
AMD-K5-PR75	2-3	2-3	2-3	2-3	1-2	50
AMD-K5-PR90	1-2	2-3	2-3	2-3	2-3	60
AMD-K5-PR100	2-3	1-2	2-3	2-3	2-3	66
AMD-K5-PR120	1-2	2-3	2-3	2-3	1-2	60
AMD-K5-PR133	2-3	1-2	2-3	2-3	2-3	66
AMD-K5-PR150	1-2	2-3	1-2	1-2	2-3	60
AMD-K5-PR166	2-3	1-2	1-2	1-2	2-3	66

CMOS DISCHARGE

Setting	JP4
Normal	OPEN
Discharge	CLOSE

P54C / P55C* INTEL MMX PENTIUM VOLTAGE SELECT

Setting JP7	P55C 2.8V *	P54C 3.52V
1-2, 3-4, 5-6, 7-8	OPEN	CLOSE

* Optional feature. Please check with your supplier your board supports MMX CPU or not.

The following jumpers are for functional testing. Normally, you did not need to change these settings.

Jumper	Default Setting
JP10	2-3
JP11	OPEN
JP12	2-3
JP13	1-2
JP14	2-3