|
ZIDA |
|
MANUAIS DE MOTHERBOARDS ZIDA |
Jumper Settings for 5DVX
| CPU Type | JC1 | JC2 | JP8 | JP9 | JP6 | Bus Frequency MHz |
| Pentium 75 | 2-3 | 2-3 | 2-3 | 2-3 | 1-2 | 50 |
| Pentium 90 | 1-2 | 2-3 | 2-3 | 2-3 | 2-3 | 60 |
| Pentium 100 | 2-3 | 1-2 | 2-3 | 2-3 | 2-3 | 66 |
| Pentium 120 | 1-2 | 2-3 | 2-3 | 1-2 | 2-3 | 60 |
| Pentium 133 | 2-3 | 1-2 | 2-3 | 1-2 | 2-3 | 66 |
| Pentium 150 | 1-2 | 2-3 | 1-2 | 1-2 | 2-3 | 60 |
| Pentium 166 | 2-3 | 1-2 | 1-2 | 1-2 | 2-3 | 66 |
| Pentium 180 | 1-2 | 2-3 | 1-2 | 2-3 | 2-3 | 60 |
| Pentium 200 | 2-3 | 1-2 | 1-2 | 2-3 | 2-3 | 66 |
| Pentium 166 MMX * | 2-3 | 1-2 | 1-2 | 1-2 | 2-3 | 66 |
| Pentium 200 MMX * | 2-3 | 1-2 | 1-2 | 2-3 | 2-3 | 66 |
FOR CYRIX/IBM CPU
| CPU Type | JC1 | JC2 | JP8 | JP9 | JP6 | Bus Frequency MHz |
| Cyrix / IBM PR120 | 2-3 | 2-3 | OPEN | OPEN | 1-2 | 50 |
| Cyrix / IBM PR133 | 1-2 | 1-2 | OPEN | OPEN | 2-3 | 55 |
| Cyrix / IBM PR150 | 1-2 | 2-3 | OPEN | OPEN | 2-3 | 60 |
| Cyrix / IBM PR166 | 2-3 | 1-2 | OPEN | OPEN | 2-3 | 66 |
FOR AMD-K5 CPU
| CPU Type | JC1 | JC2 | JP8 | JP9 | JP6 | Bus Frequency MHz |
| AMD-K5-PR75 | 2-3 | 2-3 | 2-3 | 2-3 | 1-2 | 50 |
| AMD-K5-PR90 | 1-2 | 2-3 | 2-3 | 2-3 | 2-3 | 60 |
| AMD-K5-PR100 | 2-3 | 1-2 | 2-3 | 2-3 | 2-3 | 66 |
| AMD-K5-PR120 | 1-2 | 2-3 | 2-3 | 2-3 | 1-2 | 60 |
| AMD-K5-PR133 | 2-3 | 1-2 | 2-3 | 2-3 | 2-3 | 66 |
| AMD-K5-PR150 | 1-2 | 2-3 | 1-2 | 1-2 | 2-3 | 60 |
| AMD-K5-PR166 | 2-3 | 1-2 | 1-2 | 1-2 | 2-3 | 66 |
CMOS DISCHARGE
| Setting | JP4 |
| Normal | OPEN |
| Discharge | CLOSE |
P54C / P55C* INTEL MMX PENTIUM VOLTAGE
SELECT
| Setting JP7 | P55C 2.8V * | P54C 3.52V |
| 1-2, 3-4, 5-6, 7-8 | OPEN | CLOSE |
* Optional
feature. Please check with your supplier your board supports MMX CPU or not.
The following jumpers are for functional testing.
Normally, you did not need to change these settings.
| Jumper | Default Setting |
| JP10 | 2-3 |
| JP11 | OPEN |
| JP12 | 2-3 |
| JP13 | 1-2 |
| JP14 | 2-3 |