Jumper Settings for 6DXP

ZIDA

MANUAIS DE MOTHERBOARDS ZIDA

Jumper Settings for 6DXP

CPU Speed Selection

CPU Speed (MHz)	External Bus (MHz)	JP4	JP5	JP15	JP16
150	60	[Short]	[Open]	[Short]	[Open]
166	66	[Open]	[Short]	[Open]	[Short]
180	60	[Short]	[Open]	[Short]	[Open]
200	66	[Open]	[Short]	[Open]	[Short]

Frequency Ratio	JP8	JP9	JP10
2.5x	[Open]	[Short]	[Short]
2.5x	[Open]	[Short]	[Short]
3x	[Short]	[Open]	[Short]
3x	[Short]	[Open]	[Short]

CPU Voltage Selection
The CPU voltage is automatically detected. No jumper setting is needed.

CMOS Reset
If you want to reset the CMOS data, please follow the procedures as below:
1. Switch off the power supply of your system
2. Short jumper JP19

Description	JP19
Normal Operation	Open
CMOS Reset	Short

After CMOS reset, all data in CMOS will be lost. So you need to re-enter the data again.