|
|
PC Server 500 - POST
(S/390) |
Applicable
countries/regions |
Service hints
& tips |
Power-On Self Test
(POST) When you power-on
or re-boot the computer, the computer runs the following two
power-on self tests (POSTs).
Note These tests are run
consecutively without intervention.
BIOS Code (resides on the system
board) |
Checks the memory, system board, direct access
storage device (DASD), configuration, etc.. If you
receive a POST error from the BIOS code, refer to the
"Symptom-to-FRU Index (Micro Channel)" in the PS/2
Hardware Maintenance Manual |
Licensed Internal Code (LIC) (written to
files on the hard disk drive) |
Checks the P/390 processor card and attached
memory card. |
If you receive a
POST error (165) from the P/390 LIC code, see "Error Reporting
(P/390)" in the Hardware Maintenance Manual.
|
Document id: DDSE-43WNM8
|
Last modified: 2001-02-02
|
Copyright © 2002 IBM Corporation
| | |