2.904 bytes

Service Hints & Tips

Document ID: GSMH-3DAEYR

TP Dock I - Symptom -TO -FRU Index

Applicable to: World-Wide

Symptom-to-FRU Index:
The Symptom-to-FRU Index lists error symptoms and possible causes. The most likely cause is listed first.

Note:
Replace the FRUs one at a time in the sequence shown in the FRUs of the Dock I and Sequence of Action column. If an replaced part did not resolve the problem, put the original part back in the Dock I. Do not replace non-defective parts. Always begin with 'General Checkout—. This index also can be used to help you decide which FRUs to have available when servicing the Dock I.

Numeric error codes show the errors detected in the POST or system operation. In the following error codes, X can be any number.

FRU codes are used for errors detected by diagnostic tests. If no error codes are available, use narrative symptoms.
If the symptom is not listed or you cannot correct the problem using this index, go to ¿Undetermined Problem—.

IMPORTANT:
1. Before replacing any SCSI device, verify that there are no duplicate SCSI ID settings.
2. Make sure that there are no conflicts of hardware settings, such as, interrupt level, memory address, DMA channel, and I/O address.
3. If you have both an error message and an incorrect audio response, diagnose the error message first.
4. If you cannot run the advanced diagnostic tests, but did receive a POST error message, diagnose the POST error message.
5. If you did not receive an error message, look for a description of your error symptoms in the first part of this index.
6. Check all power supply voltages before you replace the main board, I/O card, and audio card of the Dock I. (See ¿Power Systems Checkout—.)

Search Keywords

Hint Category

Hardware Maintenance Information

Date Created

13-01-97

Last Updated

27-08-98

Revision Date

21-08-99

Brand

IBM ThinkPad

Product Family

ThinkPad Docking Stations

Machine Type

3545

Model

001

TypeModel

Retain Tip (if applicable)

N/A

Reverse Doclinks
and Admin Purposes