9.756 bytes

Product Information

Document ID: VLAR-3TMQJ4

4.5GB Wide Ultra SCSI Hard Drive - Product Overview

Applicable to: World-Wide


General Information
This 7200 RPM hard disk drive offers ultra-high performance storage in a Wide Ultra SCSI interface for professional workstations and high-end commercial desktops.

Warranty: 3 year limited Customer Carry-In Exchange

This product replaces:
*

This product was replaced by:
*

Packaging:
One box containing...


Marketing and FRU Part Numbers
World Wide...
Marketing part number -> 01K1327
FRU part number -> 10L6084

Additional Part Numbers
Part number(s) for ordering multiple quantities:
None

Associated FRU Part Number(s):
None

Product Dates
World Wide...
Announce Date-> 4/15/1998
Planned Availability Date-> 5/15/1998
Withdrawal Date-> Not Applicable
Effective Withdrawal Date-> Not Applicable

Technical Specifications
Performance Specifications as known at time of announcement:
Average read: 7.5 ms

Buffer size: 512 KB

Data Protocols:

Data Rates:
Max: 40 MB per second
Sustained: 8 - 13 MB per second

Fax Protocols:

Formatted capacity: 4510 MB

Interface type: SCSI

Power:
Idle power (average): 5.3 watts
Random Read/Write (average): 9.9 watts
Start-up Current (+12 V - max): 2.00 amps

Rotational speed: 7200 rpm

Storage capacity: 4.5GB

Vibration (swept sine):
Operating: 0.5 G
Not Operating: 2.0 G

Actual performance varies based upon many factors and is frequently less than the maximum possible. 128 KB of buffer space is reserved for the drive firmware.

Physical, Environmental, and Compatibility Specifications as known at time of announcement:
Weight: * lbs (0.61 kg)
Height: * inches (25.4 mm)
Width: * inches (101.6 mm)
Depth: * inches (146 mm)

Operating Temperature:


Relative Operating Humidity: low of 8% to a high of 90%
Relative Storage Humidity: low of 5% to a high of 95%

Agency Approvals:


ENERGY STAR-Compliant: *. The ENERGY STAR emblem does not represent EPA endorsement of any product or service.

Hardware Requirements for IBM systems:


Hardware Requirements for Non-IBM systems:
These drives adhere to the American National Standards Institute (ANSI) SCSI-2 X3.131:1994 standard. The system is responsible to provide sufficient air movement to maintain surface temperature below 60 deg C at the center of the top cover of the drive.

Supported Operating Systems:


Compatibility: The 68-pin drive to 50-pin cable converter allows the use of the 4.5GB Wide Ultra SCSI HDD in older systems designed for older narrow 50-pin devices. When a 68-pin hard drive is adapted for use in 50-pin cabling, its highest interface data transfer rate is reduced to be compatible with the existing cable and SCSI bus adapter.

Limitations:
Under DOS, the maximum partition size is approximately 2GB. You may have to install multiple partitions to realize the full capacity of the drive.

Active termination must be used on the SCSI bus and the total SCSI cable length should be kept to three meters maximum (for attachment of up to four devices), or 1.5 meters (for attachment of up to eight devices).

You should consider this information especially when configuring external SCSI devices.

Supported Software: Not Applicable

Other: None

Document Note(s):

  1. The symbol * is used to denote that the information is currently unavailable for this product.
  2. All dates are represented in the US English format of mm/dd/yyyy (where mm=month, dd=day, yyyy=year).
  3. FRU stands for Field Replacement Unit. It is the part number used for ordering service/replacement parts.
  4. Effective Withdrawal means that on the given date IBM will have withdrawn the products from marketing. After that date, the product can not be obtained directly from IBM.

Search Keywords

Document Category

Overview

Date Created

17-04-98

Last Updated

05-04-99

Revision Date

05-04-2000

Brand

IBM Options

Product Family

Hard Drives

Machine Type

4.x GB

Model

01K1327

TypeModel

Retain Tip (if applicable)

Reverse Doclinks
and Admin Purposes