|
6.019 bytes |
Service Hints & Tips |
Document ID: PMYS-3LZHPZ |
|
This document is provided to IBM and our Business Partners to help sell and/or service IBM products. It is not to be distributed beyond that audience or used for any other purpose. |
Aptiva - Quantum 6.4 GB (5.25 inch) hard disk drive
Applicable to: World-Wide
Overview of Building Block
6.4 GB (5.25 inch) HDD
P/N: 00K7932 FRU P/N: 00K7933
Source: Quantum
Specification Compatibility
IDE ATA-3
Feature Specifics
Quantum Model Cyclone (Bigfoot) CY 6.4AT
Enhanced IDE (ATA-3) interface: PIO Mode 4 and DMA Mode 2 Support (NOTE: DMA is NOT supported on 2140-2142, this is drive only spec)
Sector Format of 512 KB/sector
Write Cache for Sequential Write Operation
LBA and Extended CHS Modes
AT Bus Cable Select
Dedicated Head Landing Zone
300,000 Hours MTBF
Double Burst ECC On-the-Fly
Self Diagnostics on Power On and Resident Diagnostics
Power Saving Modes
Automatic Actuator Lock
Transparent Defect Management with ADR (Automatic Defect Reallocation)
Supports SMART (Self Monitoring and Analysis Reporting Technology)
3,600 RPM Spindle Speed
Performance Characteristics:
Average Seek Time: 15.0 ms (includes head settle time)
Track-to Track Seek Time: 3.0 ms (includes settling)
Full Stroke Seek Time: 30.0 ms (includes settling)
Average Rotational Latency: 8.33 ms
Rotational Speed: 3,600 RPM
Data Rate Disk to Buffer: 46.5 to 83.8 MB/sec
Data Rate Buffer to Host
ATA-3 PIO Mode 4: 16.6 MB/sec Max
DMA Mode 2: 16.6 MB/sec Max (NOTE: DMA is NOT supported on 2140-2142, this is drive only spec)
Buffer Size: 128 KB
Interleave: 1:1
Environmental Specifications:
Operating:
Temperature: 0 to 55 degrees C
Non-Condensing Humidity: 5 to 85%
Shock: 10 G for 11 ms
Vibration: 1 G peak-to-peak at 5-300 Hz
Altitude: -200 to 3,000 meters
Non-Operating:
Temperature: -40 to 75 degrees C
Non-Condensing Humidity: 5 to 95%
Shock: 70 G for 11 ms
Vibration: 2 G peak-to-peak at 5-300 Hz
Altitude: -200 to 3,000 meters
Idle Sound (typical)
Pressure: 34 dBA
Power: 3.9 bels
Power Specifications:
Start-up: 27.0 Watts
Idle: 7.6 Watts
Read/Write: 10.9 Watts
Random Seeking: 13.6 Watts
Sleep/Standby: 1.7/1.4 Watts
Disk Drive Configuration:
Form Factor: 3.5 Inch Disks
Interface: ATA-3
Model Number: Bigfoot CY 6.4AT
Formatted Capacity: 6,510.55 MB
Number of Disks: 3
Number of Heads: 6
Number of Cylinders: 8,895
Number of Sectors: 12,715,920
Sectors/Track: 156 to 304
Bytes per Sector: 512
Track Density: 7,257 (TPI)
Physical Specifications:
Width: 5.75 Inches (146.2 mm)
Length: 8.0 Inches (203.2 mm)
Height: 1.0 Inch (25.4 mm)
Weight: 1.2 Pounds (0.53 Kg)
Connector Options:
ATA-3: 40-Pin Dual In-line
Power: 4-Pin Industry Standard
Reliability Specifications:
Projected Field MTBF: 300,000 POH
Start/Stop Cycles: 20,000 Minimum (40 Degrees C)
Preventative Maintenance: Not Required
Data Errors:
Recoverable: 1 per 10 to the 12th Power
Non-Recoverable: 1 per 10 to the 14th Power
Error Correction Method: Reed Solomon
Jumper Settings:
Drive 0 Select (MASTER) Drive 1 Select (SLAVE) Cable Select (AUTO)
o o o o o o o o o o o o
| |
o o o o o o o o o o o o
MASTER w/SLAVE Present PARK
o o o o o o o o
| | |
o o o o o o o o
|
Search Keywords |
| |
|
Hint Category |
Hard Drives, Jumper/Switch Settings, Technical Specifications | |
|
Date Created |
17-09-97 | |
|
Last Updated |
25-01-99 | |
|
Revision Date |
24-01-2000 | |
|
Brand |
IBM Aptiva | |
|
Product Family |
Aptiva | |
|
Machine Type |
2140, 2142 | |
|
Model |
All | |
|
TypeModel |
| |
|
Retain Tip (if applicable) |
| |
|
Reverse Doclinks |