|
7.613 bytes |
Service Hints & Tips |
Document ID: PMYS-3PKRN6 |
Aptiva - 2144/2168 (SL-F/H/I) Type 1 SIMM configuration
Applicable to: World-Wide
Factory-installed SIMMs are non-parity SIMMs. However, both parity and non-parity industry standard SIMMs (2MB, 4MB, 8MB, 16MB, or 32MB) are supported. When installing SIMMs, run the Setup Utility to clear XX62 or 164 error codes.
SIMMs can be installed in any order and size. See Table 1-2.
To verify the size of an unknown SIMM, do the following.
1. Power off the system unit.
2. Install the SIMM in J20, J21, or J22 and power on the system unit.
3. Read the SIMM memory count shown at the top left of the screen as the system displays the POST icon.
Table 1-2. Gold-Contact SIMM Configurations
|
Total Memory |
J22 |
J21 |
J20 |
|
2MB |
2MB |
- |
- |
|
4MB |
2MB |
2MB |
- |
|
4MB |
4MB |
- |
- |
|
6MB |
2MB |
4MB |
- |
|
6MB |
2MB |
2MB |
2MB |
|
8MB |
4MB |
4MB |
- |
|
8MB |
4MB |
2MB |
2MB |
|
8MB |
8MB |
- |
- |
|
10MB |
2MB |
8MB |
- |
|
10MB |
4MB |
4MB |
2MB |
|
12MB |
2MB |
2MB |
8MB |
|
12MB |
4MB |
4MB |
4MB |
|
12MB |
4MB |
8MB |
- |
|
14MB |
2MB |
4MB |
8MB |
|
16MB |
16MB |
- |
- |
|
16MB |
4MB |
4MB |
8MB |
|
16MB |
8MB |
8MB |
- |
|
18MB |
2MB |
8MB |
8MB |
|
20MB |
4MB |
8MB |
8MB |
|
20MB |
4MB |
16MB |
- |
|
24MB |
8MB |
8MB |
8MB |
|
24MB |
4MB |
4MB |
16MB |
|
32MB |
16MB |
16MB |
- |
|
32MB |
32MB |
- |
- |
|
32MB |
8MB |
8MB |
16MB |
|
36MB |
4MB |
16MB |
16MB |
|
40MB |
4MB |
4MB |
32MB |
|
48MB |
16MB |
16MB |
16MB |
|
48MB |
8MB |
8MB |
32MB |
|
64MB |
32MB |
32MB |
- |
|
64MB |
16MB |
16MB |
32MB |
|
96MB |
32MB |
32MB |
32MB |
|
Search Keywords |
| |
|
Hint Category |
Hardware Installation/Configuration, Memory | |
|
Date Created |
24-09-96 | |
|
Last Updated |
23-03-99 | |
|
Revision Date |
23-03-2000 | |
|
Brand |
IBM Aptiva | |
|
Product Family |
Aptiva | |
|
Machine Type |
2144, 2168 | |
|
Model |
P30; 2R0; LS0; LP0; LS1; LSA; LSC; LS2; LSB; LS3; LSD; LP1; LPA; LPC; LP2; LPB; LPD; KP1; KPA; KPC; KPE; KP2; KPB; KPD; KU0; KU2; KU1; KU3; XP1; XP2; YP1; YP2; 70J; 71J; 900; 910; 911; 91W; 914; 921; 92W; LB0; KB0; LL1; L10; K10; LL2; L20; K20; KU6; X10; Y10; Z10; X20; Y20; Z20; 120; 121; 123; L11; L15; L16; K25; K26; U11; U15; U16 | |
|
TypeModel |
| |
|
Retain Tip (if applicable) |
| |
|
Reverse Doclinks |