|
2.233 bytes |
Service Hints & Tips |
Document ID: DSHY-3PVTEC |
TP Selectadock III - Checkout Guide - USB
Applicable to: World-Wide
USB Device
Test the USB (universal serial bus) device by connecting it to the computer before testing it on the SelectaDock Docking
System.
1.Make sure the USB device is correctly connected and the power is turned on.
2.Run the device self-test.
If the device self-test does not run correctly, the problem is in the device. Refer to the device service manual.
If the device self-test runs correctly, connect the USB parallel test cable (P/N 05K2580) on the USB connector and run the
advanced diagnostic tests. If the test detects an error, replace the defective part.
|
Search Keywords |
| |
|
Hint Category |
Hardware Maintenance Information | |
|
Date Created |
05-12-97 | |
|
Last Updated |
28-08-98 | |
|
Revision Date |
21-08-99 | |
|
Brand |
IBM ThinkPad | |
|
Product Family |
ThinkPad Docking Stations | |
|
Machine Type |
3547 | |
|
Model |
003 | |
|
TypeModel |
| |
|
Retain Tip (if applicable) |
N/A | |
|
Reverse Doclinks |