10.258 bytes |
Product Information |
Document ID: DETR-3TKGZ5 |
This document is provided to IBM and our Business Partners to help sell and/or service IBM products. It is not to be distributed beyond that audience or used for any other purpose. |
Aptiva MM55 Monitor - Technical Specifications
Applicable to: World-Wide
Display case color: |
Charcoal gray |
Tube Type |
FST CRT |
Nominal screen size: |
15inches (381mm) |
Viewable image size: |
13.6inches (347mm) |
Maximum viewable width: |
280mm |
Maximum viewable height: |
210mm |
Pixel pitch/type: |
.28 dot |
Anti-glare: |
Yes |
Anti-static: |
Yes |
Touch screen: |
No |
Tilt/swivel stand: |
Yes |
Screen surface treatment: |
Anti-reflective |
Multimedia features: |
Bass/treble control |
Multiscanning: |
-- |
Number of factory presets: |
8 |
Number of user presets: |
8 |
Preset modes: |
720x400/70; 640x480/60, 75, 85; 800x600/75, 85; 1024x768/75, 85 |
Microprocessor control: |
Yes |
Syncing: |
Multifrequency |
Top flicker free VESA mode: |
-- |
Maximum addressibility: |
1280x1024 |
Onscreen programming: |
Yes |
Self-diagnostics: |
-- |
Plug and play support: |
Yes |
Ergonomics: |
EPA Energy Star compliant (US), ISO 9241 Part 3, NUTEK, Windows 95 Listing |
Emissions: |
EN 55022 Class B, FCC Class B, ICES-003 Class B, MPR-II, VCCI Class 2 |
Acoustics: |
-- |
Apple/workstation compatible: |
No |
Vertical refresh rate (low; high) (Hz): |
55; 120 |
Maximum Horizontal frequency (low; high) (kHz): |
30; 69 |
Power management features: |
VESA DPMS compliant |
Power consumption: |
100Watts |
Video inputs (connectors): |
-- |
User display controls: |
Brightness, Color point, Contrast, Degauss, Digital Control, Geometry reset, Horizontal position, Horizontal size, Image rotation, Pincushion adjustment, Trapezoidal adjustment, Vertical position, Vertical size, Volume |
Other: |
-Phosphor Type: P22 |
Weight |
-- |
Height |
-- |
Depth |
-- |
Operating Temperature (C) (low, high) |
10; 35 |
Relative Humidity (%) (low, high) |
8; 80 |
Wet Bulb (C) | |
Restrictions |
-Not all supported display modes run at the high refresh rate necessary for flicker-free performance. Display modes at lower refresh rates are available for compatibility with older video adapters and system units and will not be ISO-compliant., -Supported display modes are a function of the attaching system unit. The full range of display modes available with these monitors may not be available or supported with all combinations of system units, their operating systems and application software., -Horizontal and vertical sync timings are critical in order to achieve acceptable screen images. As a consequence, support for all possible variations in H/V sync timings for any display mode cannot be stated., -Adjustments of the user controls to enlarge the image to its maximum size requires that the signal timings of the display mode being used lie fully within the monitor timing specifications., -The number of colors shown in any display mode is not limited by the monitor but depends upon the capabilities of the adapter the monitor is attached to., -Implementation of monitor power management follows the VESA DPMS standard. This standard must also be implemented in the attaching system unit hardware and software for monitor power management to be effective. The system implementation must provide user-adjustable, power-down delay periods. The monitor power management function is invoked only after appropriate signals are received from an attached system unit or video adapter., -Implementation of monitor Plug and Play follows the VESA DDC standard. This standard must also be implemented in the attaching system unit hardware and software for monitor Plug and Play to be effective., -Certain functions require that the system unit to which the monitor is attached be simply configured, therefore, not all monitor functions will be enabled when attached to all system units., -Proper audio operation is only possible when the monitors are attached to the appropriate Aptiva L and S series systems. |
Search Keywords |
| |
Document Category |
Technical Specifications | |
Date Created |
15-04-98 | |
Last Updated |
20-01-99 | |
Revision Date |
20-01-2000 | |
Brand |
IBM Aptiva, IBM Monitors | |
Product Family |
Aptiva, Multimedia (MM50/MM70/etc.) | |
Machine Type |
2140, 2142, 2116 | |
Model |
All | |
TypeModel |
| |
Retain Tip (if applicable) |
| |
Reverse Doclinks |