2.781 bytes |
Service Hints & Tips |
Document ID: JBAR-3QNPP6 |
IBM PS/2 - 102 or 225 error on 8570 with 486 upgrade installed
Applicable to: World-Wide
Symptom:
1. After replacing a 80386 processor, in a model 8570, with a 486DX33 Processor Upgrade, FRU P/N92F0436, a 102 configuration error, or 225 error, may be encountered.
2. After replacing a battery, in a model 8570, a 102 configuration error, or 225 error, may be encountered.
Problem Isolation Aids:
The system's battery was removed during installation or was just replaced.
Fix:
1. Remove the 486DX33 processor, FRU P/N92F0436.
2. Install the 80386 processor.
3. Insure that the system battery is connected.
4. Configure the system using Auto-Config or Restore-Config.
5. Remove the 80386 processor and reinstall the 486DX33 Processor Upgrade per instructions provided with the option, P/N 32G4144. The upgrade instructions indicate that the battery is not to be removed during installation.
SAS KEYWORDS:
PSY2 HYPERTECH 8570 HYPERTEC
Search Keywords |
| |
Hint Category |
Error Messages, Processors, Retain | |
Date Created |
23-03-94 | |
Last Updated |
25-01-99 | |
Revision Date |
19-05-2000 | |
Brand |
IBM PC | |
Product Family |
PS/2 | |
Machine Type |
8570 | |
Model |
all | |
TypeModel |
| |
Retain Tip (if applicable) |
H121477 | |
Reverse Doclinks |