1.873 bytes |
Service Hints & Tips |
Document ID: GSMH-3F3F8F |
This document is provided to IBM and our Business Partners to help sell and/or service IBM products. It is not to be distributed beyond that audience or used for any other purpose. |
IBM ValuePoint - DX/4 50/100MHz system board FRU
Applicable to: World-Wide
Service Information:
The system board FRU for ValuePoint Performance Series 6482, 6484, 6492, and 6494 DX/4-50/100 models is now P/N06H6355. SX, DX, and DX2 models will continue to use FRU P/N82G2397. When installing P/N06H6355 in DX/4 models, insure jumper J36 is installed on pins 2 and 3 (front two pins). This jumper is located in front of the hard disk drive cable connectors. Refer to the old system board and the ValuePoint Hardware Maintenance Manual for other jumper settings.
The above information will be included in the next release of ValuePoint HMM (S61G-1423).
SAS KEYWORDS:
PSY2 PSY2BRD PSVP PSVPBRD
82G2397 06H6355 6H6355 P/N6H6355
PSYPART PSVPPART PS/VALUEPOINT VALUE POINT
Search Keywords |
| |
Hint Category |
Retain | |
Date Created |
04-01-95 | |
Last Updated |
08-05-98 | |
Revision Date |
29-04-99 | |
Brand |
IBM PC | |
Product Family |
ValuePoint | |
Machine Type |
6472, 6482, 6484, 6492, 6494 | |
Model |
all | |
TypeModel |
| |
Retain Tip (if applicable) |
H06579 | |
Reverse Doclinks |