1.651 bytes |
Service Hints & Tips |
Document ID: GSMH-3BBELX |
This document is provided to IBM and our Business Partners to help sell and/or service IBM products. It is not to be distributed beyond that audience or used for any other purpose. |
PC800 - Configuring A Token Ring Adapter
Applicable to: World-Wide
Symptom:
Token Ring Adapter fails to bind in PC 800
Problem Isolation Aids:
None.
Fix:
The Token Ring adapters supported are the IBM Token Ring ISA-16 Adapter and the Token Ring Auto ISA Adapter. The following settings are required in order for the card to function in a Windows NT environment:
*ROM Address DC00
*I/O Address A24 (Secondary)
*IRQ 2/9
*Shared RAM 16K
In addition the Auto T-R Adapter needs the 'auto sense' parameter set to 'no'. This card can be configured by going to the RIPL section of Systems Management Services (SMS). The RIPL menu is under 'Utilities' on the main menu. When selecting the adapter in the Windows NT Network Setup list, make sure you configure as 'alternate' adapter and not 'primary'.
Search Keywords |
| |
Hint Category |
Adapter Cards, Configuration | |
Date Created |
18-10-95 | |
Last Updated |
24-06-98 | |
Revision Date |
19-12-98 | |
Brand |
IBM PowerPC | |
Product Family |
PowerPC | |
Machine Type |
6070, 6050 | |
Model |
| |
TypeModel |
| |
Retain Tip (if applicable) |
N/A | |
Reverse Doclinks |