|
46.578 bytes |
Product Information |
Document ID: DDSE-42TSHN |
PC Server 325 - Announcement Letter (8639-PT0, PTW, PB0, RB0)
Applicable to: World-Wide
TITLE
IBM PC Server 325 - New 266MHz Pentium(R) II Servers Bring Outstanding Performance and Functionality to Your Business Enterprise
PRODUCT NUMBER
US, LA, CAN
|
Description |
Machine |
Models |
Part Number |
|
PC Server 325 |
8639 |
PT0 |
8639PT0 |
|
PC Server 325 |
8639 |
PTW |
8639PTW |
|
PC Server 325 |
8639 |
PB0 |
8639PB0 |
|
PC Server 325 |
8639 |
RB0 |
8639RB0 |
EMEA
|
Description |
Machine |
Models |
Part Number |
|
PC Server 325 |
8639 |
PT0 |
9PT0Exx |
|
PC Server 325 |
8639 |
PTW |
9PTWExx |
|
PC Server 325 |
8639 |
PB0 |
9PB0Exx |
|
PC Server 325 |
8639 |
RB0 |
9RB0Exx |
Note: Part numbers ending in "xx" refer to country designators.
Note: For specific ordering information in Europe/Middle East/Africa countries concerning language, additional standard models and configuration options, please see Europe/Middle East/Africa announcement letter ZG97-0475.
AP
|
Description |
Machine |
Models |
Part Number |
|
PC Server 325 |
8639 |
PT0 |
60H9630 |
|
PC Server 325 |
8639 |
PTW |
60H9638 |
|
PC Server 325 |
8639 |
PB0 |
60H9644 |
|
PC Server 325 |
8639 |
RB0 |
60H9658 |
Japan:
|
Description |
Machine |
Models |
Part Number |
|
PC Server 325 |
8639 |
PB0 |
60H9646 |
|
PC Server 325 |
8639 |
RB0 |
60H9660 |
|
Description |
Part Number |
|
PC Server 325 Security Cover Kit and Cable Option |
94G7526 |
GENERAL PRODUCT/SYSTEM DESCRIPTION
The PC Server 325 systems are entry enterprise LAN servers using industry standard architectures. These servers contain two bus architectures:
PC SERVER 325 - 233MHZ AND 266MHZ MODELS
o PCI - Peripheral Component Interconnect which supports data transfer rates of up to 132MB/sec and runs at 33MHz clock speeds in these Pentium II models.
o ISA - Industry Standard Architecture which supports data transfer rates of up to 8.33MB/sec and runs at 8.33MHz clock speeds.
These PC Server 325 systems contain either a 266MHz or 233MHz Pentium II microprocessor with integrated 512KB ECC L2 cache, a 32MB or 64MB DIMM, an integrated 7880 UltraSCSI controller, SVGA video controller with 1MB of video memory, a full duplex 100/10Mbps Ethernet controller, and a second Intel Slot 1 upgrade connector. The 266MHz Pentium II processor operates at 266MHz for internal operations, while the 233MHz Pentium II processor operates at 233MHz for internal operations. The external speed for both processors is 66MHz.
o These servers can be upgraded to SMP by adding a second Pentium II processor of the same speed and cache size.
o System memory can be expanded up to 512MB by installing 32MB, 64MB, 128MB, or 256MB DIMM options in the four memory connectors.
o Supported memory can be installed in mixed configurations.
o PC Server 325 is offered in four models - three mini-tower models and a rack model.
- The mini-tower models are featured as "open bay" (8639-PT0,-PB0) and a model preconfigured with a 4.51GB Ultra SCSI hard disk drive (8639-PTW).
- The rack model (8639-RB0) is featured as an open bay model only.
BASIC CONFIGURATIONS:
|
Model |
Processor |
Memory |
Disk Drive |
Mechanical |
|
8639-PT0 |
233MHz |
32MB |
open bay |
Mini-Tower |
|
8639-PTW |
233MHz |
32MB |
4.51GB HDD |
Mini-Tower |
|
8639-PB0 |
266MHz |
64MB |
open bay |
Mini-Tower |
|
8639-RB0 |
266MHz |
64MB |
open bay |
Rack |
PC Server 325 models provide seven storage expansion bays and six expansion slots. A 250W World Wide switchable power supply with auto restart capability is standard.
o The seven drive bays consist of two 5.25/3.5-inch half-high bays and five 3.5-inch slim high bays.
o The six expansion slots of the PC Server 325 consist of two PCI/ISA combination slots and four dedicated PCI slots
The PC Server 325 standard features include:
o 266MHz or 233MHz Pentium II processor with integrated 512KB ECC L2 cache for higher levels of data integrity
o Second Intel Slot 1 connector for SMP Pentium II upgrades
o 32MB or 64MB system memory expandable to 512MB - memory subsystem consists of EDO 60ns DIMMs with an ECC memory controller on the processor card for error correction of single-bit memory errors
o Integrated system board diskette controller (supports up to 2 diskette devices)
o SVGA controller with 1MB video memory
o UltraSCSI-2 Fast/Wide PCI controller
o 4.51GB Ultra SCSI Hard Disk Drive (8639-PTW)
o Full duplex, 100/10Mbps Ethernet controller
o One 1.44MB 3.5-inch diskette drive
o An 8X-speed SCSI CD-ROM drive
o 250 watt switchable, world-wide power supply with temperature controlled fan and a secondary fan to cool the system board components.
o Time Of Day clock and battery
o Standard Device Ports/Connectors:
- Keyboard
- Pointing Device
- SCSI-2 Fast/Wide external connector
- SVGA port
- Ethernet port using RJ-45 connector
- Two high speed serial/asynchronous ports, NS16550 compatible
- One high speed (up to 2MB/sec. data transfer speed) bi-directional, parallel port supports devices using ECP/EPP/SPP protocols adhering to the IEEE 1284 standard
- Two USB ports
OPERATING AND POWER CONTROLS, INDICATORS AND PROCEDURES
Operating, power controls, indicators, and procedures are explained in the PC Server System Library as shipped with the product.
DATA SECURITY CHARACTERISTICS
_____________________________
Security and auditability features of these servers are:
o Power-on and privileged access password functions provide controls of who has access to the data and server setup program on the server.
o A set keyboard password is used to lock the keyboard without turning off the system.
o A set unattended Start Mode allows the system keyboard to be locked to all entries except the password and at the same time allows other computers on the network to access the system disk drive.
o A mechanical lock allows the user to lock the system cover to prevent unauthorized personnel access to diskette drives or removable media.
o Selectable boot sequence can be used to prevent unauthorized installation of software or removal of data from the diskette drive.
o Tie-down capability is achieved by utilizing a common U bolt attached to the back frame.
o Operation without a keyboard and display are supported once the server is configured with the appropriate network operating system. This minimizes the risk of unauthorized people tampering with the system software and configuration.
o A PC Server 325 Security Cover Kit and C2 Cable Option is also available that can detect tampering or removal of the server covers. This option, when enabled, can also alert the system administrator once this detection occurs.
Limitations:
Small Computer System Interface (SCSI), as defined in the American National Standard Institute (ANSI) standard X3.131-1986, provides a port for the attachment of external devices. The SCSI bus may be internal or external to the system unit. PC Server 325 models using the integrated UltraSCSI-2 Fast/Wide Controller are in conformance with this standard and have an external port.
PC Server 325 systems with these controllers or adapters also conform with ANSI SCSI-2 and work with SCSI-2 fast or fast/wide devices. It is a customer's responsibility to ensure that the server is secure, or has a security cover, to prevent sensitive data from being removed via external SCSI ports.
o The PC Server 325 Security Cable Kit, the PC Server 32 Security Cover and the PC Server Advanced Systems Management Adapter are available to upgrade PC Server 325 systems to higher levels of security.
User management is responsible for evaluation, selection, and implementation of security features, administrative procedures and appropriate controls in application systems and communication facilities.
PHYSICAL CHARACTERISTICS FOR INSTALLATION PLANNING
SPECIFIED OPERATING ENVIRONMENT
PHYSICAL SPECIFICATIONS:
US, AP, LA, CAN, EMEA
The PC Server 325:
|
8639-PT0 |
8639-PTW | |
|
Processor - |
Pentium II |
Pentium II |
|
L2 Cache - |
512KB ECC |
512KB ECC |
|
Memory (ED0) - |
32MB ECC |
32MB ECC |
|
Video - |
SVGA |
SVGA |
|
Disk Interface - |
Wide Ultra SCSI |
Wide Ultra SCSI |
|
Fixed Disk - |
Open Bay |
4.51GB |
|
Total Bays - |
7 |
7 |
|
Bays Available |
5 |
4 |
|
Total Slots - |
6 |
6 |
|
Slots Available - |
6 |
6 |
|
Ethernet Cont. - |
10/100Mbps |
10/100Mbps |
|
CD-ROM - |
8X |
8X |
|
Floppy Drive - |
1.44MB |
1.44MB |
|
Power Supply - |
250W |
250W |
|
8639-PB0 |
8639-RB0 | |
|
Processor - |
Pentium II |
Pentium II |
|
L2 Cache - |
512KB ECC |
512KB ECC |
|
Memory (ED0) - |
64MB ECC |
64MB ECC |
|
Video - |
SVGA |
SVGA |
|
Disk Interface - |
Wide Ultra SCSI |
Wide Ultra SCSI |
|
Fixed Disk - |
Open Bay |
Open Bay |
|
Total Bays - |
7 |
7 |
|
Bays Available |
5 |
5 |
|
Total Slots - |
6 |
6 |
|
Slots Available - |
6 |
6 |
|
Ethernet Cont. - |
10/100Mbps |
10/100Mbps |
|
CD-ROM - |
8X |
8X |
|
Floppy Drive - |
1.44MB |
1.44MB |
|
Power Supply - |
250W |
250W |
HARD DISK DRIVE CHARACTERISTICS:
|
4.51GB Hard Disk | |
|
Formatted Capacity: |
4510 million bytes * |
|
Average Seek Time: |
9.0 ms or less |
|
Burst Transfer Rate (max) |
40.0MB/s |
|
Average latency: |
4.17ms |
|
Drive rotation speed (RPM) |
7200 rpm |
|
Sector Interleave |
1:1 |
8X SPEED CD-ROM DRIVE CHARACTERISTICS:
|
Average Access Time: |
150ms |
|
Average Data Transfer Rate: |
1200KB/s |
|
Data Burst (sync. or async. mode) |
5.0MB/s |
|
Buffer size |
256KB |
VIDEO SUBSYSTEM:
o 1MB DRAM display memory
o True color VGA graphical user interface accelerator
o Bit block transfer
o PCI interface
o Support for up to 24-bit per pixel color
o Compatible with VGA color, analog monochrome monitors, and multiple frequency monitors
o Integrated RAMDAC with 262,144 color palette
o Extensive graphic mode support
Supported video mode capabilities for the SVGA adapter standard on the PC Server 325.
OS/2 Warp Server (standard video memory)
|
RESOLUTION |
REFRESH RATE (HZ) |
|
640x480x16 |
60 |
|
640x480x256 |
60, 72, 75, 85 |
|
640x480x64K |
60, 72, 75, 85 |
|
640x480x16M |
60, 72, 75, 85 |
|
800x600x256 |
56, 60, 72, 75, 85 |
|
800x600x64K |
56, 60, 72, 75, 85 |
|
1024x768x256 |
60, 70, 72, 75, 85 |
OS/2 Warp Server (with optional video memory installed - PN 76H0238)
|
RESOLUTION |
REFRESH RATE (HZ) |
|
640x480x16 |
60 |
|
640x480x256 |
60, 72, 75, 85 |
|
640x480x64K |
60, 72, 75, 85 |
|
640x480x16M |
60, 72, 75, 85 |
|
800x600x256 |
56, 60, 72, 75, 85 |
|
800x600x64K |
56, 60, 72, 75, 85 |
|
800x600x16M |
56, 60, 72, 75, 85 |
|
1024x768x256 |
60, 70, 72, 75, 85 |
|
1024x768x64K |
43i, 60, 70, 75, 85 |
|
1280x1024x256 |
43i, 60, 71, 75 |
Windows NT V4.0 (standard video memory)
|
RESOLUTION |
REFRESH RATE (HZ) |
|
640x480x16 |
60, 72, 75, 85 |
|
640x480x256 |
60, 72, 75, 85 |
|
640x480x64K |
60, 72, 75, 85 |
|
640x480x16M |
60, 72, 75, 85 |
|
800x600x16 |
56, 60, 72, 75 |
|
800x600x256 |
56, 60, 72, 75, 85 |
|
800x600x64K |
56, 60, 72, 75, 85 |
|
1024x768x16 |
43i, 60, 70, 72, 75 |
|
1024x768x256 |
43i, 60, 70, 72, 75, 85 |
|
1280x1024x16 |
43i |
Windows NT V4.0 (with optional video memory installed PN 76H0238)
|
RESOLUTION |
REFRESH RATE (HZ) |
|
640x480x16 |
60, 72, 75, 85 |
|
640x480x256 |
60, 72, 75, 85 |
|
640x480x64K |
60, 72, 75, 85 |
|
640x480x16M |
60, 72, 75, 85 |
|
800x600x16 |
56, 60, 72, 75 |
|
800x600x256 |
56, 60, 72, 75, 85 |
|
800x600x64K |
56, 60, 72, 75, 85 |
|
800x600x16M |
56, 60, 72, 75, 85 |
|
1024x768x16 |
43i, 60, 70, 72, 75 |
|
1024x768x256 |
43i, 60, 70, 72, 75, 85 |
|
1024x768x64K |
43i, 60, 70, 75, 85 |
|
1152x864x256 |
70, 75 |
|
1152x864x64K |
70, 75 |
|
1280x1024x16 |
43i |
|
1280x1024x256 |
43i, 60, 71, 75 |
|
1600x1200x256 |
48i |
DIMENSIONS:
___________
Tower Models
|
Without Pedestal |
With Pedestal |
|
- Width: 195mm (7.6 inches) |
315mm (12.4 inches) |
|
- Depth: 473mm (18.6 inches) |
473mm (18.6 inches) |
|
- Height: 425mm (16.7 inches) |
455mm (17.9 inches) |
|
- Weight: (minimum ship configuration) |
17.0kg (37.5 lbs) |
|
- Weight: (maximum ship configuration) |
19.5kg (43 lbs) |
Rack Model
|
- Width: |
482mm (19.0 inches) |
|
- Depth: |
465mm (18.3 inches) |
|
- Height: |
216mm ( 8.5 inches) |
|
- Weight: |
(minimum ship configuration) 17.0kg (37.5 lbs) |
|
- Weight: |
(maximum ship configuration) 19.5kg (43 lbs) |
ELECTRICAL:
___________
- 100-125 (nominal) VAC; 50-60 Hz
- 200-240 (nominal) VAC; 50-60 Hz
- Btu Output: ship configuration - 350 Btu/Hr. (102 watts)
- Btu Output: full configuration - 860 Btu/Hr. (251 watts)
- Noise Level: (Average 1 meter position : typical machine)
Vertical Floor standing position: 5.3 bels (idling), 5.6 bels (operating)
NOTE:
The noise emission level stated is the declared (upper limit) sound power level, in bels, for a random sample of machines, typically configured, and operating in idle mode; i.e., powered on, but no disk drive read/write or other I/O activity. All measurements made in accordance with ANSI S12.10 and ISO 7779, and reported in conformance with ISO 9296.
PC Server 325 tower models are intended for use as floor-standing systems and are tested and designed to operate in a vertical position. The PC Server 325 rack model is designed and tested to operate in a horizontal position.
STANDARDS:
These systems comply with or support the following:
o Multi Processor Specification (MPS) 1.1
o Peripheral Component Interconnect (PCI) specification 2.0 and 2.1, PCI slot-dependent. Three primary PCI slots are 2.1-compliant, whereas the
three secondary PCI slots are 2.0-compliant. This design allows support for adapter cards to be installed that are designed to either specification for greater configuration flexibility.
o The PC Server 325 systems are hardware-enabled to meet the International Standards Organization (ISO) 9241, Part 3.
EQUIPMENT APPROVALS AND SAFETY:
US, LA, CAN
- FCC - Certified to comply with Part 15 of the FCC Rules (Class A)
- UL 1950*
- CSA C22.2 No. 950
- NOM-019*
(*) The PC Server 325 was certified by the respective UL and NOM agencies.
AP
- VCCI Class 1
- New Zealand Ministry of Commerce Approval-CISPR 22, Class A
- IEC-950 manufacturer's declaration of compliance for APG
- C-Tick Mark (AS/NZS 3548 Class A)
- Taiwan (BCIQEMC Type Certification)
EMEA
- CE Mark (EN 55022 Class A)
- CISPR 22, Class A
- TUV/CDE EN60950/IEC-950
- FCC - Certified to comply with Part 15 of the FCC Rules (Class A)
o For non-Nordic European Countries
A CB Certificate and CB Test Report must be provided listing compliance to all CB Countries.
o For Nordic European Countries
These products have been tested to the requirements of IEC-950/EN60950 "Safety of Information Technology Equipment".
OPERATING ENVIRONMENT:
o Temperature:
- 10.0 to 35.0 degrees C (50 to 95 degrees F) at 0 - 914m (0 - 3000ft.)
- 10.0 to 32.0 degrees C (50 to 90 degrees F) at 914 - 2133m (3000 - 7000 ft.)
o Relative Humidity: 8 to 80 (percent)
o Maximum Altitude: 2133m (7000 ft.)
HARDWARE REQUIREMENTS:
The PC Server 325 requires an analog display (G42, G51, G52, G72, or equivalent) for system setup and service.
The PC Server 325 with an integrated SVGA controller along with an ISO-capable display, such as G42, G51, G52, or G72 Color Monitors, and either PC DOS 6.3, or later, or OS/2 Warp Server V4.0 is designed to comply with the requirements specified in the International Organization for Standardization (ISO) standard 9241/3.
SOFTWARE REQUIREMENTS:
PROGRAMMING REQUIREMENTS: The following IBM operating systems/extensions support the PC Server 325:
o OS/2 Warp Server, V4.0
o OS/2 Warp Server Advanced, V4.0 (*)
o OS/2 Warp Server Advanced, V4.0 SMP Feature(*)(A)
AP
Japan
o OS/2 Warp Server Advanced, V4.0J SMP Feature(*)(A)
(*) Certification is planned for these operating systems.
The following vendor network operating systems are supported in the PC Server 325:
o Novell**
- NetWare** 3.12 (*)
- IntranetWare(*)(A) (includes NetWare 4.11 SMP and SFT-III)
o Santa Cruz Operation, Inc
- SCO** Open Server 5.0.4(*)(A)
- UnixWare** 2.1.2(*)(A)(B)
o Microsoft
- Windows NT 3.51 Server(A)
- Windows NT 4.0 Server(*)(A)
(*) Certification is planned for these network operating systems
(A) These network operating systems and appropriate extensions support the PC Server 325 running two processors.
(B) This network operating system is not supported in PC Server 325 if a PC ServerRAID II Ultra SCSI Adapter is installed.
Note: Further support and certification information on network operating systems will be made available at a later date and can be accessed via the World Wide Web at URL:
http://www.us.pc.ibm.com/compat/
Your IBM marketing representative can also be contacted for a complete listing of these network operating systems. The Sales Manual will be updated by product general availability with a complete list of supported software and certifications where appropriate.
COMPATIBILITY:
The PC Server 325 systems contain licensed system programs that include set configuration, set features, and test programs. Some of these system programs are stored in the system ROM, while others are contained on diskette. System BIOS is loaded from a "flash" EEPROM into system memory. This BIOS provides instructions and interfaces designed to support the standard features of the PC Server 325 and to maintain compatibility with many software programs currently operating under PC DOS and OS/2 on PC Servers; however, due to the higher speed of the processors in these models, some timing-sensitive software may require modification.
To view detailed information on the Internet about IBM and non-IBM devices, adapters, software, and network operating systems supported with PC Servers, enter:
http://www.us.pc.ibm.com/compat/
Also, customers can contact their IBM representative, Authorized Remarketer, or IBM PC HelpWare or refer to the IBM Sales Manual for information on the compatibility of hardware and software for IBM PC Servers. The Sales Manual is updated periodically as new features and options are announced that support these servers.
LIMITATIONS:
o PC Server 325 supports 512MB of EDO memory by using a various combinations of 32MB, 64MB, 128MB, or 256MB DIMMs. All supported system memory is addressable through direct memory access (DMA). All supported memory DIMMs can be installed in any combination. (Refer to the Compatiblity Section of PC Server Web page or the IBM Sales Manual, or contact your IBM reseller or marketing representative, for supported EDO DIMM memory options.)
o PC Server 325 models contain six total card slots comprised of four PCI card slots and two PCI/ISA combination slots. The top two PCI slots and
the bottom PCI slot are limited to short PCI cards.
o Microprocessor SMP upgrades must be of the same type and clock speed. Mixing microprocessors of different speeds or cache sizes is not supported.
o Because these systems are designed as industry standard servers using an industry standard floppy diskette drive interface, the location of the
media eject button on the industry standard diskette drive and the lack of support for an electronic eject 2.88MB diskette drive option may be a
limitation for customers with certain disabilities.
o PC Server 325 systems contain a 7880 UltraSCSI Fast/Wide PCI controller that has two 68-pin SCSI connectors. Up to 15 SCSI-2 devices can be attached and supported from one connector; however, if any internal SCSI devices are installed to the internal connector, only one SCSI device can be supported from the external connector.
o When using UltraSCSI mode with the integrated UltraSCSI controller, refer to the ANSI SCSI-3 FAST-20 document for cable lengths and other technical requirements to determine if the configuration can be supported. Information on this subject can also be found in the PC Server 325 System Library.
o Customers should use the version of ServerGuide that ships with the system, or a later version, to load software and drivers. Earlier versions of ServerGuide may not be compatible with the server.
Refer to the SOFTWARE REQUIREMENTS section for operating systems limitations.
CUSTOMER RESPONSIBILITIES:
The PC Server 325 is designated as customer setup. Customer setup instructions are shipped with the system.
CONFIGURATION INFORMATION:
PC SERVER 325 TOWER MODELS
The tower models of the PC Server 325 are cabled internally with a seven-drop, 16-bit wide SCSI cable. One end of this cable is attached to the
internal 16-bit connector of the 7880 UltraSCSI F/W controller. On open bay models the first drop of the seven-drop cable is attached to the standard CD-ROM through a 68- to 50-pin converter. When installing a SCSI-2 F/W hard drive, it should be installed in the lowest 3.5-inch bay and connected to the last drop on the SCSI cable to allow proper termination for the SCSI bus. In the standard drive model, the 4.51GB Wide Ultra SCSI hard disk drive and CD-ROM are preconfigured in this same manner. If connecting narrow devices to this cable, additional 68- to 50-pin SCSI converters (32G3925) must be ordered.
An external SCSI device can be attached to the PC Server 325 by connecting the 16-bit SCSI cable, that is pre-mounted to an external SCSI connector on the back panel, to the integrated SCSI controller.
PC SERVER 325 RACK INSTALLATIONS
PC Server 325 tower models are supported in the IBM Netfinity Rack. When installing the PC Server 325 in these rack enclosures, a PC Server Rack Series 300 Mounting Plate (94G4996) must be ordered. Refer to Hardware Announcement 197-xxx (RFA29081), dated September 23, 1997, for additional information about rack installations of PC Servers.
PC SERVER 325 RACK MODEL
The PC Server 325 rack model is an open bay model that is cabled internally the same as the tower model previously described. The rack model is designed to be installed in an industry standard, 19-inch rack cabinet such as the IBM Netfinity Rack. The cabinet must meet the EIA-310-D standards with a depth of at least 28 inches. Also, adequate space (approximately two inches for the front bezel and one inch for air flow) must be maintained from the slide assembly to the front door of the rack cabinet to allow sufficient space for the door to close and provide adequate air flow.
Rack Requirements:
|
Height is 5u (1 u = 1.75 in) |
222.25 mm (8.75 in) |
|
Depth |
711.2 mm (28 in) |
|
Rack rail to front door clearance |
75.4 mm (3 in) |
The 10/100Mbps, full duplex, Ethernet PCI controller, standard with PC Server 325, is connected directly to a RJ-45 connector. The RJ-45 connector provides a 10BaseT or 100Base-TX interface for connecting twisted-pair cable to the Ethernet network. Cabling is not included with the server. To connect the 100/10 controller to a repeater or switch, use an unshielded twisted pair (UTP) cable with RJ-45 connectors at both ends. For 100Mbps operation, Category 5 cabling must be used. For 10Mbps operation, Category 3, or better, cabling must be used.
There are no additional cabling requirements, other than for system power, keyboard, mouse, and monitor connections.
INSTALLABILITY:
The PC Server 325 models require at about 20 minutes for installation. Installation includes unpacking, setting up, and powering on the system. Additional time is required to install an operating system and other adapters or features.
USEABILITY CHARACTERISTICS
By following the setup instructions, the user attaches the keyboard and monitor. The power cord for the display and system unit is then plugged into an electrical outlet. Power is then turned on the monitor, then the system unit. When the system unit is powered on, it performs a power-on self-test (POST) that takes approximately 60 seconds. After POST has completed successfully, installation of software may then be accomplished.
AP, LA, CAN, EMEA CONSIDERATIONS
NLS support is provided for many of the PC Server 325 components in the following languages: U.S. English, Worldwide English (U.K.), French, German, Italian, Spanish, and Japanese.
The NLS support includes PC national language code page support, national language keyboard support, multi-lingual nomenclature, translated documentation and machine readable information as required by the individual countries. For Belgium, NLS publications are provided in French. For Switzerland, NLS publications are provided in French or German. For Arabic and Hebrew, NLS publications are provided in English.
|
Search Keywords |
| |
|
Document Category |
Technical Specifications | |
|
Date Created |
03-12-98 | |
|
Last Updated |
03-12-98 | |
|
Revision Date |
03-12-99 | |
|
Brand |
IBM PC Server | |
|
Product Family |
PC Server 325 | |
|
Machine Type |
8639 | |
|
Model |
PT0; PTW; PB0; RB0 | |
|
TypeModel |
| |
|
Retain Tip (if applicable) |
| |
|
Reverse Doclinks |