2.719 bytes |
Service Hints & Tips |
Document ID: JBAR-3THNB9 |
This document is provided to IBM and our Business Partners to help sell and/or service IBM products. It is not to be distributed beyond that audience or used for any other purpose. |
IBM PS/2 - 9576/77 Error Code 01290xxx
Applicable to: World-Wide
Symptom:
Error code 01290xxx can be solid or intermittent. The error indication usually occurs after a processor upgrade. Maps call out system board or processor board.
Problem Isolation Aids:
None.
Fix:
Reseat the processor chip, in some cases the processor was not fully seated in manufacturing or during a processor upgrade. The following procedure should be used :-
Remove the planar board from the system and place it on a smooth, flat area. The planar board should be supported under the socket area. Push the processor down on the system board until fully seated. The heel of your hand may be used to accomplish this. When the processor is fully seated, the pins are barely visible when viewed from the side.
SAS KEYWORDS:
PSY2 PS2 PS/2 ERR
012901XX 012902XX 012903XX PSY2ERR
01290200 D/T9576 D/T9577 PSY2BRD
9577 9576
Search Keywords |
| |
Hint Category |
Error Messages, Processors, Retain | |
Date Created |
05-04-94 | |
Last Updated |
25-01-99 | |
Revision Date |
19-05-99 | |
Brand |
IBM PC | |
Product Family |
PS/2 | |
Machine Type |
9576, 9577 | |
Model |
| |
TypeModel |
| |
Retain Tip (if applicable) |
H12411 | |
Reverse Doclinks |