|
2.417 bytes |
Service Hints & Tips |
Document ID: JBAR-42DLBB |
IBM PC300GL (Type 6267, 6277, 6287) - Hard file timeout error logged in Windows NT Event Viewer
Applicable to: World-Wide
SYMPTOM:
The Windows NT Event Viewer in Administrative Tools logs an error message that the hardfile did not respond within the time out period.
PROBLEM ISOLATION AIDS:
This tip applies, but is not limited to IBM PC300GL Series 6267/77/87 systems running Windows NT 4.0 and installed with IDE or SCSI hardfiles equal to or greater than 10GB in capacity.
The Timeout Error condition has been found to be limited to IDE and SCSI hardfiles that operate at speeds of 7200 rpm and faster that may require 10 to 15 seconds to spin up to full operating speed.
FIX:
None is required in Windows NT 4.0. This condition is due to a limitation of the operating system and is due to be corrected in Windows NT 5.0 when available from Microsoft.
The user can delete the hardfile timeout error logs from the Windows NT Event Viewer if desired.
Windows and Windows NT are trademarks of Microsoft Corporation.
SAS KEYWORDS:
PSY2 PSY2ERR PSY2FDSK CDT
CDTERR CDTFDSK PWS D/T6267
D/T6277 D/T6287 6267 6277
|
Search Keywords |
| |
|
Hint Category |
Hard Drives, Windows NT, Retain | |
|
Date Created |
19-11-98 | |
|
Last Updated |
30-12-98 | |
|
Revision Date |
30-12-99 | |
|
Brand |
IBM PC | |
|
Product Family |
PC 300GL | |
|
Machine Type |
6267, 6277, 6287 | |
|
Model |
all | |
|
TypeModel |
| |
|
Retain Tip (if applicable) |
H165280 | |
|
Reverse Doclinks |