|
10.725 bytes |
Product Information |
Document ID: JGRI-3F52HR |
|
This document is provided to IBM and our Business Partners to help sell and/or service IBM products. It is not to be distributed beyond that audience or used for any other purpose. |
Aptiva MM70 Monitor - Technical Specifications
Applicable to: World-Wide
|
Primary Manufacturer |
IBM/Daewoo |
|
Type |
Digital/Borderless |
|
Size (actual diagonal viewing area) |
17" |
|
Dot Pitch |
.28 |
|
Maximum Viewable area |
320 x 240 mm |
|
Graphics |
Color SVGA |
|
Anit-reflective |
Yes |
|
Anti-static |
Yes |
|
Multi-frequency operation |
Yes |
|
Horizontal Frequency |
30 - 69 kHz |
|
Vertical Frequency |
50-120 Hz |
|
Monitor Frequency Setting (Configure) |
69 kHz |
|
Maximum Flicker free mode |
1024 x 768 |
|
Maximum addressibility |
1280 x 1024 |
|
Built-in Microphone |
Yes/Dynamic |
|
Integrated speakers |
Yes, 3 watt/channel |
|
External Microphone socket |
Yes |
|
External Headphone socket |
Yes |
|
Subwoofer Connection socket |
Yes |
|
Models | |
|
NH/UV (100-240V 50/60 Hz) |
Auto Sense - 593 |
|
EQ/UV (100-240V 50/60 Hz) |
Auto Sense - 595 |
|
SH/UV (100-240V 50/60 Hz) |
Auto Sense - 594 |
|
NH/UV (100-240V 50/60 Hz) Japan |
Auto Sense - 596 |
|
Video Modes | |
|
640 x480 60 Hz |
Yes |
|
640 x 480 (72, 75, 85 Hz) |
Yes |
|
800 x 600 (56, 60, 72, 75 Hz) |
Yes |
|
1024 x 768 (87 Hz Interlaced) |
Yes |
|
1024 x 768 (60, 70 Hz) |
Yes |
|
1024 x 768 75 Hz |
No |
|
1280 x 1024 88Hz Interlaced |
No |
|
Factory Preset Display Modes |
Refresh Line Rate |
|
720 x 400 70Hz NI |
31.5 KHz |
|
640 x 480 60Hz NI |
31.5 KHz |
|
640 x 480 75Hz NI |
37.5 KHz |
|
640 x 480 85Hz NI |
37.5 KHz |
|
800 x 600 75Hz NI |
43.3 KHz |
|
800 x 600 75Hz NI |
53.7 KHz |
|
1024 x 768 75Hz NI |
60.0 KHz |
|
1024 x 768 85Hz NI |
68.7 KHz |
|
Features | |
|
MPR II & VLMF |
Yes |
|
Users Manual |
Multi-lingual |
|
Energy Saver (EPA Energy Star < 30W) |
Yes |
|
ISO 9241 Part 3 |
Yes |
|
Plug & Play Support (DDC2b) |
Yes |
|
Tilt/Swivel |
Attached |
|
Door |
No |
|
Controls | |
|
Type |
OSD |
|
Power button |
Yes |
|
Contrast |
Yes |
|
Brightness |
Yes |
|
Horizontal Center |
Yes |
|
Vertical Center |
Yes |
|
Horizontal Size |
Yes |
|
Vertical Size |
Yes |
|
Pin Cushion |
Yes |
|
Trapezoid |
Yes |
|
Colourpoint Adjust |
Yes |
|
Screen Rotate |
No |
|
Mute |
Yes |
|
Volume Up/Down |
Yes |
|
Status |
Yes |
|
Power Screen |
Yes |
|
Physical | |
|
Degaussing |
n/a |
|
Signal cable |
2.1 M attached |
|
Connector |
15 pin Mini D audio in, mic out |
|
Power Cord Length |
1.8 M |
|
Height |
53 cm / 21 in (approx.) |
|
Width |
48 cm / 19 in (approx.) |
|
Depth |
47 cm / 18.5 in (approx.) |
|
Weight |
20 kg / 44 lbs (approx.) |
|
Heat Output |
n/a |
|
Fits in SIB |
No |
Limitations
Supported display modes are a function of the attached system unit. The full range of display modes available with these monitors may not be available or supported with all combinations of system units, operating systems and application software.
Horizontal and vertical sync signal timings are critical in order to achieve acceptable screen images. As a consequence, support for all possible variations in H/V sync timings for any display mode cannot be stated. Adjustment of the end controls to enlarge the image to its maximum size requires that the signal timings of the display mode being used lie fully within the monitor timing specifications.
|
Search Keywords |
| |
|
Document Category |
Technical Specifications | |
|
Date Created |
13-03-97 | |
|
Last Updated |
20-01-99 | |
|
Revision Date |
20-01-2000 | |
|
Brand |
IBM Aptiva, IBM Monitors | |
|
Product Family |
Aptiva, Multimedia (MM50/MM70/etc.) | |
|
Machine Type |
2159, 2162 | |
|
Model |
All | |
|
TypeModel |
| |
|
Retain Tip (if applicable) |
| |
|
Reverse Doclinks |