For instructions and limitations on creating the diskette, click here:
Updating System Program
Notes: You need an AC adapter and a charged battery pack to update the system program.
1. Print these instructions or display them on another computer.
2. Firmly connect the AC adapter to the computer.
3. Insert the System Program Service Diskette into the diskette drive and turn on the computer.
4. When prompted press the '1' key to update the system program.
Warning: Do not turn off the computer until the update has been completed. IF YOU TURN OFF THE COMPUTER WHILE THE UPDATE IS STILL IN PROGRESS, THE SYSTEM BOARD MAY HAVE TO BE REPLACED.
Summary of Change
v0.11
- (New) Support for ThinkPad i Series 1400
v1.00
- (Fix) After resuming from display standby mode, the system doesn't enter Hibernation mode in Windows 98 APM mode.
- (Fix) When the system resumes from standby mode by low battery signal, the Timer(clock) of Windows 98(APM mode) is delayed.
- (Fix) The wrong data is printed out after Windows 98 soft reset.
- (Fix) Accept the media type CD-ROM XA format 2 ('90h') as a bootable media.
v1.02
- (Fix) Sometimes the system becomes unstable, if Samsung DIMM is used.
v1.05
- (Fix) When waking the system up from standby mode by pressing 'Caps Lock ' or the Scrolling button, the screen will sometimes print an un-expect numerical key in Notepad or any other editor which is opened at that time.
- (Fix) Detecting an external monitor may fail during bootup
- (Fix) Exiting Notebook Manager after loading the BIOS default value may cause the system to become inoperative.
- (Fix) The system can not boot up from the LG CD-ROM drive.
System Program Information
Each version of the System Program Service Diskette contains the following system program (BIOS).
Diskette BIOS
Version Version
-------- ------------
0.11 V3.0 R01-A5H
1.00 V3.0 R01-A6A
1.02 V3.0 R01-A6D
1.05 V3.0 R01-A6L
|