2.305 bytes |
Service Hints & Tips |
Document ID: RMIE-3HWAY6 |
This document is provided to IBM and our Business Partners to help sell and/or service IBM products. It is not to be distributed beyond that audience or used for any other purpose. |
IBM PC330/PC350 - Riser installation procedure
Applicable to: World-Wide
Service Information:
An improperly installed riser card may cause many problems including, but not limited to, adapter card failures, 161, 162, and 163 errors, system hangs, trap errors, etc. Before replacing any parts for any apparent hardware problem, insure the riser is completely seated in the system board and any adapters are completely seated in the riser.
The following procedure should be followed when installing the riser card in a 6571 or 6573 to insure the riser remains fully seated in the system board:
1. Remove the screw which holds the riser support (DASD mounting bracket) to the rear of system (important).
2. Insert the riser in the system board connecter.
3. Screw the riser to the riser support.
4. Screw the bracket to rear of frame without lifting the riser support.
Search Keywords |
| |
Hint Category |
Hardware Installation/Configuration | |
Date Created |
23-06-95 | |
Last Updated |
25-02-99 | |
Revision Date |
25-02-2001 | |
Brand |
IBM PC | |
Product Family |
PC 330, PC 350 | |
Machine Type |
6571, 6573 | |
Model |
Various | |
TypeModel |
| |
Retain Tip (if applicable) |
H127483 | |
Reverse Doclinks |