|
5.428 bytes |
Service Hints & Tips |
Document ID: YAST-3GSMTC |
28.8/14.4 PCMCIA Data/Fax Modem w/Integrated DAA - Cellular use for Windows NT
Applicable to: World-Wide
The 33.6 Modem PC Card may be used in cellular mode with the additional of a cellular upgrade kit and a cellular phone. The installation files that come with the 33.6 Modem PC Card use default settings that should allow the card to work with any cellular phone supported by your cellular upgrade kit.
1. Consult the terminal application's (e.g., QuickLink II) users guide to locate methods for updating the initialization string.
2. Add AT-sec=1 to the end of the initialization string. This change will be required for each non-TAPI application.
|
Phone (Make/Model #) |
AT Commands |
IBM Option Kit Part # |
|
Mitsubishi 3500/4000, Diamondtel 20X/22x |
AT&F1-SEC=1,17 |
41H7482 |
|
Motorola 8 pin flip (550) |
AT&F1-SEC=1,10 |
41H7487 |
|
NEC P110/P120/Talktime 180, AT&T 3610 |
AT&F1-SEC=1,14 |
41H7484 |
|
NEC P700/P701 |
AT&F1-SEC=1,16 |
41H8951 |
|
OKI 1145/1150, AT&T 3760 |
AT&F1-SEC=1,10 |
41H7483 |
|
Nokia 2120, AT&T 6650 |
AT&F1-SEC=1,10 |
41H8950 |
|
OKI 1300 series (1325/1335/1375) |
AT&F1-SEC=1,10 |
41H8952 |
You may order these cellular option kits from IBM by calling 1-800-426-2968 and select OPTION Sales.
Inability to Select Cellular Protocol:
Cellular protocol is grayed out if cellular phone is not attached when setting advanced properties.
To select cellular protocol in Advance Connection Settings:
1. Attach Cellular phone.
2. GO to Control Panel.
3. GO to Modems and highlight the IBM PCMCIA 33.6+14.4 Data+Fax Modem.
4. Select Properties.
5. Select Advanced.
6. Select cellular protocol.
|
Search Keywords |
| |
|
Hint Category |
Modems, Windows NT, PCMCIA (PC Card) | |
|
Date Created |
05-05-97 | |
|
Last Updated |
05-04-99 | |
|
Revision Date |
02-04-2000 | |
|
Brand |
IBM Options | |
|
Product Family |
Modems | |
|
Machine Type |
28.8K | |
|
Model |
25H6420 | |
|
TypeModel |
| |
|
Retain Tip (if applicable) |
| |
|
Reverse Doclinks |