|
3.306 bytes |
Service Hints & Tips |
Document ID: YAST-3JYTFV |
TP Dock II - How to disable the SCSI BIOS
Applicable to: World-Wide
How to disable the SCSI BIOS on the Dock II.
Note: Method 1 is the preferred method as it is a more reliable means of accomplishing SCSI BIOS Disabling.
Docking Station 2:
Method 1:
1. Remove the cover from the Docking Station.
a. Remove two thumbscrews on rear of dock.
b. Pull cover forward and then up.
2. Locate the SCSI dip switch block.
3. Set switches are follows. 1-on, 2-on, 3-on, 4-off (off is to the right, on is to the left.)
4. Replace cover, and Thumbscrews.
Method 2:
1. Cold Boot system,
2. When the CTRL+A prompt appears during POST shows press CTRL+A.
3. Select - "Configure/View Host Adapter Settings".
4. Use Down Arrow to Highlight, "Advanced Configuraiton Options".
5. Press Enter.
6. Use Down Arrow to Highlight "Host Adapter BIOS".
7. Press Enter.
8. Highlight "Disable".
9. Press Enter.
10. Press the ESC key, twice and then Y for Yes.
11. Press the ESC key, then Y for Yes, then any key to reboot system.
SCSI BIOS has been disabled.
|
Search Keywords |
| |
|
Hint Category |
Docking/Port Replicators | |
|
Date Created |
14-07-97 | |
|
Last Updated |
22-01-99 | |
|
Revision Date |
12-03-99 | |
|
Brand |
IBM ThinkPad | |
|
Product Family |
ThinkPad 360, ThinkPad 701, ThinkPad 750, ThinkPad 755C/CS, ThinkPad 755CE/CSE, ThinkPad 755CX, ThinkPad 755CV, ThinkPad 755CD, ThinkPad 755CDV, ThinkPad 760C, ThinkPad 760E, ThinkPad 760CD, ThinkPad 760L/LD, ThinkPad 760ED, ThinkPad 760XD, ThinkPad 760EL/ELD, ThinkPad 760XL, ThinkPad 765L, ThinkPad 765D, ThinkPad Docking Stations | |
|
Machine Type |
2620, 2630, 9545, 9546, 9547, 3546, 2419, 2337 | |
|
Model |
Various | |
|
TypeModel |
| |
|
Retain Tip (if applicable) |
| |
|
Reverse Doclinks |