|
1.977 bytes |
Service Hints & Tips |
Document ID: JBAR-3U2KT7 |
|
This document is provided to IBM and our Business Partners to help sell and/or service IBM products. It is not to be distributed beyond that audience or used for any other purpose. |
IBM PS/2 - 174 Errors After Running Auto Configuration
Applicable to: World-Wide
Symptom:
After running automatic configuration for a 174 error on a 9576 or 9577, the system reboots and POSTs another 174 error. The POST message then instructs you to run automatic configuration again. This will occur after changing the harddisk SCSI ID to a lower ID. For example, 6 to 5, 5 to 4, etc.
Problem Isolation Aids:
This problem will only occur with reference diskette Version 1.00.
Fix:
When asked to run automatic configuration, a second time, answer no. Continue into 'Set Configuration' and 'Set and View SCSI devices'. Remove the unused SCSI ID and save this configuration. Your unit will now POST correctly without 174 errors. This problem will be fixed in the next release of IML code for the 9576 and 9577. The IML drive should always be set to SCSI ID6.
SAS KEYWORDS:
PSY2 PSY2PROG D/T9577 D/T9576
PSY2DIAG PSY2FDSK PSY2ERR HARDFILE
HARD FILE FIXED DISK
|
Search Keywords |
| |
|
Hint Category |
Retain | |
|
Date Created |
25-09-92 | |
|
Last Updated |
01-05-98 | |
|
Revision Date |
30-04-99 | |
|
Brand |
IBM PC | |
|
Product Family |
PS/2 | |
|
Machine Type |
9576, 9577 | |
|
Model |
| |
|
TypeModel |
| |
|
Retain Tip (if applicable) |
H095027 | |
|
Reverse Doclinks |