|
1.859 bytes |
Product Information |
Document ID: DDSE-43WNP7 |
PC Server 500 - Machine Check Error Messages (S/390)
Applicable to: World-Wide
Machine Check Error Messages
Note
The diagnostic and error reporting programs may refer to the P/390 as a P/370.
If an error is detected during or after the P/390 card is initialized, a dialog box containing a Machine Check error is displayed on the screen. This error may be caused by one or more of the following:
- Missing or bad .ADF or .DGS files
- Missing or incorrect statement in the congif.sys file (The statement for the P/390 should be the last line in the config.sys file.)
- Missing or incorrect code on the P/390 card
- Defective hardware
The following is a list of common machine check errors.
- Can't open/find ús file. RC=$d2
- Control Store Parity Error. Try END P/370 and IPL again.
- Uncorrectable memory error at ' $s'x (daughter card) code= $s
- No status available.
- PS/2 used invalid S/370 address code= $s fic= $s addr= $s
- Internal use of invalid S/370 address. code= $s fic= $s addr= $s
- code = ' $s'x, fic= $s addr=' $s'x
|
Search Keywords |
| |
|
Document Category |
Diagnostics | |
|
Date Created |
07-01-99 | |
|
Last Updated |
07-01-99 | |
|
Revision Date |
07-01-2000 | |
|
Brand |
IBM PC Server | |
|
Product Family |
PC Server 500 | |
|
Machine Type |
8641 | |
|
Model |
| |
|
TypeModel |
| |
|
Retain Tip (if applicable) |
| |
|
Reverse Doclinks |