3.149 bytes |
Service Hints & Tips |
Document ID: BBOD-3NKMKH |
TP 770 - Hangs during Midi file playback
Applicable to: World-Wide
SYMPTOM:
Shortly after starting the playback of a midi file, the system hangs. This only occurs on battery power with the Windows 95 preload when "MIDI for ThinkPad WaveTable MidiSynth Device" is selected in Multimedia Properties as Midi output device.
Recovery from hang
When hang occurs the system will not power off by on/off switch. To power off system either press the Reset Button (to the left of the main on/off switch) or eject then reinsert the main battery. Now the system can be powered on. A message "Windows was not properly shutdown..." may be displayed. Press Enter and allow ScanDisk to run.
WORK AROUND:
There are 2 configuration choices for midi playback. For MIDI Playback choose "MIDI for FM Synthesis" or do not play MIDI files when on Battery power.
SOLUTION:
This has been corrected with the release of the 56K modem upgrade for the Advanced Communications Processor.
Click here to obtain the diskette -
ADDITIONAL INFORMATION:
The U.S. Preload is shipped with "MIDI for ThinkPad WaveTable MidiSynth Device" as default. Other geography's are loaded with "MIDI for FM Synthesis" as default. The problem does not occur with the latter setting.
Procedure to Check Midi output device and change if needed
1. Open "My Computer" then "Control Panel" then "Multimedia"
2. Choose "MIDI" tab of Multimedia Properties
3. Note the highlighted choice in MIDI output section
4. If "MIDI for ThinkPad WaveTable MidiSynth Device" is highlighted,
select "MIDI for FM Synthesis" to avoid this problem. Choose "Apply"
then "OK". End of procedure.
Search Keywords |
| |
Hint Category |
Communications | |
Date Created |
06-11-97 | |
Last Updated |
16-04-98 | |
Revision Date |
13-04-99 | |
Brand |
IBM ThinkPad | |
Product Family |
ThinkPad 770 | |
Machine Type |
9549 | |
Model |
All | |
TypeModel |
| |
Retain Tip (if applicable) |
| |
Reverse Doclinks |