|
3.129 bytes |
Service Hints & Tips |
Document ID: VLAR-3DTKLG |
|
This document is provided to IBM and our Business Partners to help sell and/or service IBM products. It is not to be distributed beyond that audience or used for any other purpose. |
1.6/3.2GB QIC 3080 TR3 Internal Tape Backup Unit - Configuration tip when using TR3 drive on Aptiva and PC Desktop
Applicable to: World-Wide
A successful install was used by using the following configuration process with the TR3 Internal Tape Backup Unit (06H9712).
When configuring the TR3 tape drive in an Aptiva or in the PC Desktops 300 series, use QIC tape drive, and the tape accelerator with these settings:
IRQ 6
DMA 2
I/O Address 3F0.
The customer must change the jumpers on the accelerator card, which can be found in the user's manual on pages 15 and 16. Ensure that the customer has made a note of the default settings for the adapter.
Once the changes have been made for the accelerator card, remove jumpers from the ID0 and ID1 block. Move 2 jumpers over 2 positions (from dma 3 to dma 2). Again, ensure that the customer has made a note of the default settings. The tape drive should now be recognized.
|
Search Keywords |
| |
|
Hint Category |
Configuration, Tape Drives | |
|
Date Created |
30-01-97 | |
|
Last Updated |
18-03-99 | |
|
Revision Date |
17-03-2000 | |
|
Brand |
IBM Options | |
|
Product Family |
Tape Drives | |
|
Machine Type |
1.x GB | |
|
Model |
06H9712 | |
|
TypeModel |
| |
|
Retain Tip (if applicable) |
| |
|
Reverse Doclinks |
Matt Spencer |