|
5.359 bytes |
Service Hints & Tips |
Document ID: GSMH-3AFM7H |
IBM PC140 - Supported memory configurations
Applicable to: World-Wide
Memory Configuration (Type 6260)
You can install a maximum of four single in-line memory modules (SIMMs) in the computer.
The system supports a minimum of 8 MB and a maximum of 128 MB of memory. Use only tin lead, 72-pin, 70 ns fast-page mode, non-parity SIMMs.
Memory modules are installed in two memory banks, Bank 0 and Bank 1 (see System Board Layout (Type 6260). Each bank supports 4, 8, 16, or 32 MB single- or double-density SIMMs. Each bank used must contain a pair of SIMMs of the same size and density. For best performance, fill Bank 0 first.
The following table shows some possible SIMM combinations and the total memory size for each combination:
|
Bank 0 |
Bank 1 |
Total | ||
|
SIMM1 |
SIMM2 |
SIMM3 |
SIMM4 | |
|
4 MB |
4 MB (single) |
8 MB | ||
|
4 MB (single) |
4 MB (single) |
4 MB (single) |
4 MB (single) |
16 MB |
|
8 MB (double) |
8 MB (double) |
16 MB | ||
|
8 MB (double) |
8 MB (double) |
8 MB (double) |
8 MB (double) |
32 MB |
|
8 MB (double) |
8 MB (double) |
16 MB (single) |
16 MB (single) |
48 MB |
|
16 MB (single) |
16 MB (single) |
32 MB | ||
|
16 MB (single) |
16 MB (single) |
16 MB (single) |
16 MB (single) |
64 MB |
|
32 MB (double) |
32 MB (double) |
64 MB | ||
|
32 MB (double) |
32 MB (double) |
4 MB (single) |
4 MB (single) |
72 MB |
|
32 MB (double) |
32 MB (double) |
8 MB (double) |
8 MB (double) |
80 MB |
|
32 MB (double) |
32 MB (double) |
16 MB (single) |
16 MB (single) |
96 MB |
|
32 MB (double) |
32 MB (double) |
32 MB (double) |
32 MB (double) |
128 MB |
|
Search Keywords |
| |
|
Hint Category |
Hardware Maintenance Information | |
|
Date Created |
14-05-96 | |
|
Last Updated |
21-04-98 | |
|
Revision Date |
15-04-99 | |
|
Brand |
IBM PC | |
|
Product Family |
PC 140 | |
|
Machine Type |
6260 | |
|
Model |
Various | |
|
TypeModel |
| |
|
Retain Tip (if applicable) |
| |
|
Reverse Doclinks |