|
3.649 bytes |
Service Hints & Tips |
Document ID: YAST-3JZJPL |
TP General - How to Modify the Startup in Easy-Setup
Applicable to: World-Wide
How to Change the Startup Sequence on your ThinkPad using Easy-Setup.
1. Ensure that ThinkPad is turned off.
2. Press and Hold the F1 key down.
3. Turn on Power while still holding F1.
4. Once in Easy-Setup, Click on Start-Up.
5. Click on the RESET icon to remove any previous Sequence. Note: This puts the system into default, FDD-1, HDD-1.
6. Now click on the icon for the first device you want the computer to use. (e.g. FDD-1.)
7. Next click on the icon for the next device you want the computer to use. (e.g. HDD-1.) Note: You may continue adding device until all four boxes are filled.
8. Click OK to exit, then click on RESTART.
9. Click on OK again and unit will reboot using the new startup sequence.
|
Search Keywords |
| |
|
Hint Category |
BIOS | |
|
Date Created |
15-07-97 | |
|
Last Updated |
26-01-99 | |
|
Revision Date |
26-01-2000 | |
|
Brand |
IBM ThinkPad | |
|
Product Family |
ThinkPad 360, ThinkPad 365X/XD, ThinkPad 380, ThinkPad 380D, ThinkPad 380E, ThinkPad 380ED, ThinkPad 380XD, ThinkPad 380Z, ThinkPad 385D, ThinkPad 385E, ThinkPad 385ED, ThinkPad 385XD, ThinkPad 560, ThinkPad 560E, ThinkPad 560X, ThinkPad 560Z, ThinkPad 600, ThinkPad 600E, ThinkPad 750, ThinkPad 755C/CS, ThinkPad 755CE/CSE, ThinkPad 755CX, ThinkPad 755CV, ThinkPad 755CD, ThinkPad 755CDV, ThinkPad 760C, ThinkPad 760E, ThinkPad 760CD, ThinkPad 760L/LD, ThinkPad 760ED, ThinkPad 760XD, ThinkPad 760EL/ELD, ThinkPad 760XL, ThinkPad 765L, ThinkPad 765D, ThinkPad 770, ThinkPad 770E/ED, ThinkPad 770X, ThinkPad 770Z | |
|
Machine Type |
2620, 2625, 2635, 2636, 2640, 2641, 2645, 2646, 9545, 9546, 9547, 9548, 9549, 9544 | |
|
Model |
Various | |
|
TypeModel |
| |
|
Retain Tip (if applicable) |
| |
|
Reverse Doclinks |