2.156 bytes |
Service Hints & Tips |
Document ID: YAST-3SFSUG |
ISDN-S0 Active 2000 Adapter - CAPI support not recognized by CFOS under OS/2
Applicable to: World-Wide
Problem:
The ISDN-S0 Active 2000 adapter and its driver have been successfully installed. In order to emulate a modem under CAPI, CFOS has been installed. However on rebooting the system, the CFOS device driver does not load and issues an error message that the CAPI support cannot be found.
Solution:
Start the ISDN-S0 Active 2000 adapter configurator. Click on the tab for 'common' and activate the CAPI 1.1 IDC interface. After rebooting the system everything should be fine. Please note: currently only CAPI 1.1 is supported.
Keywords: obi isdn s0 active 2000 adapter capi cfos os/2
Search Keywords |
| |
Hint Category |
General Information, OS/2, Adapter Cards | |
Date Created |
10-03-98 | |
Last Updated |
25-11-98 | |
Revision Date |
19-11-99 | |
Brand |
IBM Options | |
Product Family |
Communication Adapters | |
Machine Type |
ISDN | |
Model |
63F4844; 98F2348; 98F2349; 98F2360 | |
TypeModel |
| |
Retain Tip (if applicable) |
| |
Reverse Doclinks |