|
2.240 bytes |
Product Information |
Document ID: DDSE-42DV4M |
Netfinity 3000 - Power Management
Applicable to: World-Wide
Power Management
With Power Management, the server and monitor can be set to use a reduced-power state if they are inactive for a specified length of time. You can also specify options to automatically start the server.
|
Attention
The ACPI BIOS Mode feature is the only available Power Management feature. |
The APM BIOS Mode feature is set to Disabled. Do not change this default value.
Using the Automatic Configuration and Power Interface BIOS Mode
When the automatic configuration and power interface (ACPI) BIOS mode is enabled, the operating system controls the power management features of your server and the settings for APM BIOS mode are ignored. Refer to your operating-system documentation to determine if your operating system supports ACPI. If your operating system does not support ACPI, you cannot use the ACPI BIOS Mode Power Management feature.
To set ACPI BIOS mode:
1. Select Power Management from the Configuration/Setup Utility program menu.
2. Set ACPI BIOS Mode to Enabled or Disabled as desired using the Left Arrow or Right Arrow key.
|
|
Search Keywords |
|
|
Document Category |
General Information |
|
|
Date Created |
20-11-98 |
|
|
Last Updated |
03-12-98 |
|
|
Revision Date |
02-12-99 |
|
Brand |
IBM PC Server |
|
Product Family |
Netfinity 3000 |
|
|
Machine Type |
8476 |
|
|
Model |
ALL |
|
|
TypeModel |
|
|
|
Retain Tip (if applicable) |
|
|
|
Reverse Doclinks
and Admin Purposes |
|