|
2.937 bytes |
Service Hints & Tips |
Document ID: MCGN-3NRPVA |
Crossbrand - Point to Point Tunneling Protocol does not work on Micro Channel based machines
Applicable to: World-Wide
Symptom:
Point to Point Tunneling Protocol does not work on Micro Channel Based Machines. PPTP does not even appear in the list of protocols on a Micro Channel based machine.
Resolution:
Microsoft had inadvertently put a "Platforms Supported" section in the OEMNXPPP.INF file. Platforms are irrelevant here since it is a higher level networking protocol. Microsoft has confirmed this as a bug and will fix it in the next service pack. Until then, IBM is providing an updated OEMNXPPP.INF file that will fix the problem.
Directions to Install PPTPMCA.ZIP:
1. Open a command Prompt.
2. Change to you %WINROOT%\SYSTEM32 directory, where %WINROOT% is the directory where you installed NT.
3. Rename the existing OEMNXPPP.INF to OEMNXPPP.BAK
4. Copy the included OEMNXPPP.INF file to the %WINROOT%\SYSTEM32 Directory.
When this is completed, you should see the Point to Point Protocol in the Protocols list in the Networking Control Panel applet.
|
Search Keywords |
| |
|
Hint Category |
Windows NT, Adapter Cards | |
|
Date Created |
12-11-97 | |
|
Last Updated |
27-10-98 | |
|
Revision Date |
20-10-99 | |
|
Brand |
IBM PC, IBM PC Server | |
|
Product Family |
PC 730, PC 750, PS/2, PC Server 310, PC Server 315, PC Server 320, PC Server 330, PC Server 500, PC Server 520 | |
|
Machine Type |
6876, 6886, 8530, 8535, 8540, 8550, 8555, 8556, 8557, 8560, 8565, 8570, 8573, 8580, 8590, 8595, 9590, 9595, 8639, 8638, 8640, 8641 | |
|
Model |
Various | |
|
TypeModel |
| |
|
Retain Tip (if applicable) |
| |
|
Reverse Doclinks |