|
Error Code / Symptom |
FRU / Action |
|
062
(Three Consecutive boot failures using the default configuration.) |
1. Run Configuration/Setup
2. Battery
3. System Board |
|
101, 102
(System and processor error) |
1. System Board |
|
106
(System and processor error) |
1. System Board |
|
111
(Channel check error) |
1. Failing ISA Adapter
2. Memory DIMM
3. System Board |
|
114
(Adapter read-only memory error) |
1. Failing Adapter
2. Run Diagnostics |
|
129
(Internal Cache error) |
1. Processor
2. Optional Processor (if installed) |
|
151
(Real time clock error) |
1. Run Diagnostics
2. Battery
3. System Board |
|
161
(Real time clock battery error) |
1. Run Configuration/Setup
2. Battery
3. System Board |
|
162
(Device Configuration Error)
Important
Be sure to load the default settings and any additional desired settings; then, save the configuration. |
1. Run Configuration/Setup
2. Battery
3. Failing Device
4. System Board |
|
163
(Real-Time Clock error) |
1. Run Configuration/Setup
2. Battery
3. System Board |
|
164
(Memory configuration changed) |
1. Run Configuration/Setup
2. DIMM |
|
173
(System CMOS checksum bad) |
1. Run Configuration/Setup
2. Battery
3. System Board |
|
175
(Hardware error) |
1. System Board |
|
176
(Computer cover or cable cover was removed without a key being used) |
1. Run Configuration/Setup
2. System Board |
|
177, 178
(Security hardware error) |
1. Run Configuration/Setup
2. System Board |
|
184
(Power-on password corrupted) |
1. Run Configuration/Setup
2. System Board |
|
185
(Drive startup sequence information corrupted) |
1. Run Configuration/Setup
2. System Board |
|
186 |
1. Run Configuration/Setup
2. System Board |
|
187
(VPD serial number not set.) |
1. Set serial number in Setup
2. System Board |
|
188
(Bad EEPROM CRC #2) |
1. Run Configuration/Setup
2. System Board |
|
189
(An attempt was made to access the server with invalid passwords) |
1. Run Configuration/Setup, enter the administrator password |
|
195
(Processor 1 is not functioning) |
1. Processor 1
2. System Board |
|
196
(Processor 2 is not functioning) |
1. VRM
2. Processor 2
3. System Board |
|
197
(Processor 1 failed BIST) |
1. Processor 1
2. System Board |
|
198
(Processor 2 failed BIST) |
1. Processor 2
2. System Board |
|
201
(Memory test error) |
1. DIMM
2. System Board |
|
229
(Cache error) |
1. Processor
2. Optional Processor (if installed) |
|
262
(DRAM parity configuration error) |
1. Run Configuration/Setup
2. Battery
3. System Board |
|
289
(DIMM has been disabled the user or system) |
1. Run Configuration/Setup, if disabled by user
2. Ensure if a DIMM was added/changed that the power was disconnected.
3. Disabled DIMM, if not disabled by user. |
|
301
(Keyboard or keyboard controller error) |
1. Keyboard
2. System Board |
|
303
(Keyboard controller error) |
1. Keyboard
2. System Board |
|
602
(Invalid diskette boot record) |
1. Diskette
2. Cable
3. Diskette Drive |
|
604
(Diskette drive error) |
1. Run Configuration/Setup and Diagnostics
2. Diskette Drive
3. Drive Cable
4. System Board |
|
605
(Unlock failure) |
1. Diskette Drive
2. Drive Cable
3. System Board |
|
662
(Diskette drive configuration error) |
1. Run Configuration/Setup and Diagnostics
2. Diskette Drive
3. Drive Cable
4. System Board |
|
762
(Coprocessor configuration error) |
1. Run Configuration/Setup
2. Battery
3. Processor |
|
962
(Parallel port error) |
1. Disconnect external cable on parallel port.
2. Run Configuration/Setup
3. System Board |
|
11XX
(System-board serial port 1 or 2 error)
|
1. Disconnect external cable on serial port.
2. Run Configuration/Setup
3. System Board |
|
1600, 1601
(The system is able to communicate to the Service Processor, but the Service Processor failed to respond at the start of POST.)
Do the following before replacing a FRU:
1. Remove the AC power to the system, wait 20 seconds; then, re-connect the AC power. Wait 30 seconds; then, power-on the system.
2. Flash update the Service Processor. |
1. System Board |
|
1762
(Fixed Disk Configuration error)
|
1. Fixed Disk Cables
2. Run Configuration/Setup
3. Fixed Disk Adapter
4. Fixed Disk Drive
5. System Board |
|
178X
(Fixed Disk error) |
1. Fixed Disk Cables
2. Run Diagnostics
3. Fixed Disk Adapter
4. Fixed Disk Drive
5. System Board |
|
1800
(No more hardware interrupt available for PCI adapter) |
1. Run Configuration/Setup
2. Failing Adapter
3. System Board |
|
1801
(No room for PCI option ROM) |
1. Run Configuration/Setup
2. Failing Adapter
3. System Board |
|
1802
(No more I/O space available for PCI adapter) |
1. Run Configuration/Setup
2. Failing Adapter
3. System Board |
|
1803
(No more memory (above 1MB for PCI adapter) |
1. Run Configuration/Setup
2. Failing Adapter
3. System Board |
|
1804
(No more memory (below 1MB for PCI adapter)
|
1. Run Configuration/Setup
2. Move the failing adapter to slot 1 or 2
3. Failing Adapter
4. System Board |
|
1805
(PCI option ROM checksum error) |
1. Remove Failing PCI Card
2. System Board |
|
1806
(PCI to PCI Bridge error) |
1. Run Configuration/Setup
2. Move the failing adapter to slot 1 or 2
3. Failing Adapter
4. System Board |
|
1807, 1808, 1810
(General PCI error) |
1. Remove Failing PCI Card
2. System Board |
|
1962
(Drive does not contain a valid boot sector) |
1. Verify a bootable operating system is
installed
2. Run Diagnostics
3. Hard Disk Drive Cable
4. System Board
5. Hard Disk Drive |
|
2400
(Video controller test failure) |
1. Video Adapter (if installed)
2. System Board |
|
2462
(Video memory configuration error) |
1. Video Adapter (if installed)
2. System Board |
|
5962
(IDE CD-ROM configuration error) |
1. Run Configuration/Setup
2. CD-ROM Drive
3. Battery |
|
8603
(Pointing Device Error) |
1. Pointing Device
2. System Board |
|
0001200
(Machine check architecture error) |
1. Processor
2. Optional Processor |
|
000120P0, 000120P1, 000120P2, 000120PF
(Processor cache error) |
1. Failing Processor |
|
01295085
(ECC checking hardware test error) |
1. Processor |
|
I9990301
(Fixed boot sector error, no operating system installed) |
1. Run Configuration/Setup for correct startup
2. Verify operating system installed |
|
I9990305
(Fixed boot sector error, no operating system installed) |
1. Install operating system to hard disk drive. |
|
I9990650
(AC power has been restored) |
1. Check cable
2. Check for interruption of power supply
3. Power Cable |
