|
1.884 bytes |
Service Hints & Tips |
Document ID: PSMS-3QCME6 |
TP 750,755C/CS - Display on NEC monitor is corrupt after Resume
Applicable to: World-Wide
Description:
After Resuming from Suspend Mode, the display on a NEC 5D Multiscan Monitor is corrupt. All is fine on a 750C.
The ThinkPad is operating on external display on at 1024*768 resolution. Everything is fine until the machine is put in suspend mode.
Then when resuming the Multiscan monitor appears unable to sync with the display.
Solution:
Check in ThinkPad - Display for the device driver and monitor settings. Under monitor settings the NEC monitor is not listed. However
looking at the refresh rates for the default monitor the settings for 1024*768 are 43Hz. Changing this to the correct 60Hz resolves the problem
|
Search Keywords |
NEC, Monitor, CRT, Resume, Corrupt, video corruption, Refresh | |
|
Hint Category |
Display/Monitor | |
|
Date Created |
02-01-98 | |
|
Last Updated |
01-04-98 | |
|
Revision Date |
13-03-99 | |
|
Brand |
IBM ThinkPad | |
|
Product Family |
ThinkPad 750, ThinkPad 755C/CS | |
|
Machine Type |
9545 | |
|
Model |
| |
|
TypeModel |
| |
|
Retain Tip (if applicable) |
| |
|
Reverse Doclinks |