9.908 bytes |
Product Information |
Document ID: VLAR-468PZV |
Remote Access ISDN 2PRI/24IV.90 Modems - Product Overview
Applicable to: World-Wide
General Information
Remote Access Server Adapters combine IBM technology and leading industry standard modem technology to give you the essential components you need to build open-platform, remote-access concentrators. Remote access applications (modem and ISDN connectivity) can be implemented on Netfinity servers using standard Microsoft NT, Microsoft Routing, and Remote Access Server operating systems.
The IBM ISDN Primary Rate Adapter is a dual-port adapter with integrated modem support for remote access servers. The ISDN Primary Rate card provides a scalable modem based on the daughter card design. The ability to scale number of modems installed is a requirement from the European market which has less dependency on analog remote access due to the predominance of ISDN. The ISDN Primary service is the predominant method used by Internet service providers and corporations installing remote access equipment. The integrated modems are a shared resource between the two primary ISDN ports creating a virtual modem pool. The North American version comes fully populated with 24 integrated modems giving a total of 48 channels of ISDN access to share the total access. The ISDN Primary Rate card allows customers to implement a remote access concentrator with industry standard modem technology and innovative IBM technology.
Features include:
- High-performance interface maximizes Netfinity CPU power for application usage.
- V.90 modem digital termination
- ISDN up to 128 Kbps
- Implements remote access servers using non-proprietary hardware and software
- Provides broad range of connection options for extending customer's LAN networks to the remote access users
- Single supplier for platform and network interface attachment
- Increases eNetwork functionality
- Provides single service capability for both analog and digital call termination
- Supports 96 simultaneous users under Microsoft NT Remote Access Server
Warranty: 3 year limited Customer Carry-In Exchange
This product replaces:
None
This product was replaced by:
Not Applicable
Packaging:
One box containing...
- PCI Adapter
- Hardware Installation Manual
- Driver and Diagnostic CD
Marketing and FRU Part Numbers
Asia Pacific, Canada, Latin America, United States...
Marketing part number -> 33L4645
FRU part number -> 33L4612
Europe/Middle East/Africa...
Marketing part number -> 33L4646
FRU part number -> 33L4612
Modem Expansion Modules: marketing part number 33L4647, FRU part number 33L4614.
Additional Part Numbers
Part number(s) for ordering multiple quantities:
None
Associated FRU Part Number(s):
None
Product Dates
World Wide...
Announce Date-> 1/19/1999
Planned Availability Date-> 2/19/1999
Withdrawal Date-> Not Applicable
Effective Withdrawal Date-> Not Applicable
Technical Specifications
Performance Specifications as known at time of announcement:
- Power consumption: 1A@5V DC
- ISDN Primary Rate Server Adapter with integrated V.90 modem support
- Analog, V.90, and ISDN calls supported
- 1 PRI ISDN Ports, (23/30 64 Kbps or 23/30 V.90 Modem Data Channels or any combination)
- Lines can be independently configured for multiple protocol and traffic type
- MVIP interface (256 full-duplex 64 Kbps channels)
- Data Transfer 32 bit
- Bus Access Zero Wait-state
- Four RJ45 Connectors
- Data Compression
- Onboard IBM PowerPC 403 80 mip processor
- 8 MB RAM
- U and S/T interface versions
- Expandable Bandwidth (64 Kbps/128 Kbps or Nx64 up to 8 channels)
- Short hold mode
- Single-slot PCI 2.1-compliant design
- Supports multiprocessor server platforms
- All protocol stacks run on the adapter for increased performance
Physical, Environmental, and Compatibility Specifications as known at time of announcement:
Weight: * lbs (* kg)
Height: 4.20 inches (10.60 cm)
Width: .72 inches (1.80 cm)
Depth: 12.20 inches (31.11 cm)
Operating Temperature:
- low of 0 degrees Celcius to a high of 55 degrees Celcius
Relative Operating Humidity: low of 5% to a high of 95% (non-condensing)
Altitude: 0 to 12,000 ft
Agency Approvals:
- UL1950, CSA-C22.2 950 safety
- FCC Class A, Part 15
- IC CS-03
- Microsoft Certification: Hardware compatibility as a card/device (versus system)
ENERGY STAR-Compliant: No. The ENERGY STAR emblem does not represent EPA endorsement of any product or service.
Hardware Requirements for IBM systems:
Minimum System Requirements:
- 266MHz Pentium CPU, or faster
- 32Mb RAM
- 4.3Gb Disk Drive
- CD-ROM Drive
- One full-size PCI 2.1 slot
- Power supply: 155 MA at +12V, 1A at +5V
The following servers are compatible with the adapter:
- Netfinity 3000, Machine Type 8476
- Netfinity 5000, Machine Type 8659
- Netfinity 5500, Machine Type 8660
- Netfinity 7000, Machine Type 8651
Hardware Requirements for Non-IBM systems:
No information available
Software Requirements:
- Support for IP/IPX on multiple WAN protocols with Routing and remote access servers
- Independently configured B channel protocols
- X.25 for remote access support
- I2O Ready
- HDLC
- SNA Support (SNA over Frame Relay, SDLC, X.25/QLLC with SNA server, 802.2 LLC type 2 (LLC2) emulation over Frame Relay, SNADIS driver for Microsoft, SNA Server support)
- High-speed Internet/Intranet Access connectivity
- Automatic Hardware detection
- Operating system support for Windows NT 4.0 with Service Pack 3
- Microsoft NT Remote Access Server
- Software downloadable features
- Software downloadable firmware
- Diagnostic software with protocol analyzer
Limitations: Some configurations may not be supported.
Other: None
Document Note(s):
- The symbol * is used to denote that the information is currently unavailable for this product.
- All dates are represented in the US English format of mm/dd/yyyy (where mm=month, dd=day, yyyy=year).
- FRU stands for Field Replacement Unit. It is the part number used for ordering service/replacement parts.
- Effective Withdrawal means that on the given date IBM will have withdrawn the products from marketing. After that date, the product can not be obtained directly from IBM.
|
Search Keywords |
|
|
Document Category |
Overview |
|
Date Created |
22-03-99 |
|
Last Updated |
06-04-99 |
|
Revision Date |
05-04-2000 |
|
Brand |
IBM Options |
|
Product Family |
Communication Adapters |
|
Machine Type |
RAS |
|
Model |
33L4645; 33L4646 |
|
TypeModel |
|
|
Retain Tip (if applicable) |
|
|
Reverse Doclinks
and Admin Purposes |
|