|
Diagnostic Error Code |
FRU/Action |
|
000-000-XXX
BIOS Test Passed |
1. No action |
|
000-002-XXX
BIOS Timeout |
1. Flash the system
2. System board |
|
000-024-XXX
BIOS Addressing test failure |
1. Flash the system
2. System board |
|
000-025-XXX
BIOS Checksum Value error |
1. Flash the system
2. Boot block
3. System board |
|
000-026-XXX
FLASH data error |
1. Flash the system
2. Boot block
3. System board |
|
000-027-XXX
BIOS Configuration/Setup error |
1. Run Setup
2. Flash the system
3. Boot block
4. System board |
|
000-034-XXX
BIOS Buffer Allocation failure |
1. Reboot the system
2. Flash the system
3. Run memory test
4. System board |
|
000-035-XXX
BIOS Reset Condition detected |
1. Flash the system
2. System board |
|
000-036-XXX
BIOS Register error |
1. Flash the system
2. Boot block
3. System board |
|
000-038-XXX
BIOS Extension failure |
1. Flash the system
2. Adapter card
3. System board |
|
000-039-XXX
BIOS DMI data error |
1. Flash the system
2. System board |
|
000-195-XXX
BIOS Test aborted by user |
1. Information
2. Re-start the test, if need to |
|
000-196-XXX
BIOS test halt, error threshold
exceeded |
1. Press F3 to review the log file.
See "Viewing the Test Log".
2. Re-start the test to reset the log file. |
|
000-197-XXX
BIOS test warning |
1. Make sure component that is called
out is enabled and/or connected
2. Re-run test
3. Component that is called out in
warning statement
4. Component under test |
|
000-198-XXX
BIOS test aborted |
1. If a component is called out, make sure
it is enabled and/or connected
2. Flash the system and re-test
3. Go to "Undetermined Problems". |
|
000-199-XXX
BIOS test failed, cause unknown |
1. Go to "Undetermined Problems".
2. Flash the system and re-test
3. Replace component under function test. |
|
000-250-XXX
BIOS APM failure |
1. Flash the system
2. System board |
|
000-270-XXX
BIOS ACPI failure |
1. Flash the system
2. System board |
|
001-000-XXX
System Test Passed |
1. No action |
|
001-00X-XXX
System Error |
1. System board |
|
001-01X-XXX
System Error |
1. System board |
|
001-024-XXX
System Addressing test failure |
1. System board |
|
001-025-XXX
System Checksum Value error |
1. Flash the system
2. System board |
|
001-026-XXX
System FLASH data error |
1. Flash the system
2. System board |
|
001-027-XXX
System Configuration/Setup error |
1. Run Setup
2. Flash the system
3. System board |
|
001-032-XXX
System Device Controller failure |
1. System board |
|
001-034-XXX
System Device Buffer Allocation
failure |
1. Reboot the system
2. Flash the system
3. Run memory test
4. System board |
|
001-035-XXX
System Device Reset condition detected |
1. System board |
|
001-036-XXX
System Register error |
1. System board |
|
001-038-XXX
System Extension failure |
1. Adapter card
2. System board |
|
001-039-XXX
System DMI data structure error |
1. Flash the system
2. System board |
|
001-040-XXX
System IRQ failure |
1. Power-off/on system and re-test
2. System board |
|
001-041-XXX
System DMA failure |
1. Power-off/on system and re-test
2. System board |
|
001-195-XXX
System Test aborted by user |
1. Information
2. Re-start the test, if need to |
|
001-196-XXX
System test halt, error threshold
exceeded |
1. Press F3 to review the log file. See
"Viewing the Test Log"
2. Re-start the test to reset the log file. |
|
001-197-XXX
System test warning |
1. Make sure component that is called
out is enabled and/or connected
2. Re-run test
3. Component that is called out in warning
statement
4. Component under test |
|
001-198-XXX
System test aborted |
1. If a component is called out, make sure
it is enabled and/or connected
2. Flash the system and re-test
3. Go to "Undetermined Problems". |
|
001-199-XXX
System test failed, cause unknown |
1. Go to "Undetermined Problems"
2. Flash the system and re-test
3. Replace component under function test. |
|
001-250-XXX
System ECC error |
1. System board |
|
001-254-XXX
001-255-XXX
001-256-XXX
001-257-XXX
System DMA error |
1. System board |
|
001-260-XXX
001-264-XXX
System IRQ error |
1. System board |
|
001-268-XXX
System IRQ1 failure |
1. Device on IRQ1
2. System board |
|
001-269-XXX
System IRQ2 failure |
1. Device on IRQ2
2. System board |
|
001-270-XXX
System IRQ3 failure |
1. Device on IRQ3
2. System board |
|
001-271-XXX
System IRQ4 failure |
1. Device on IRQ4
2. System board |
|
001-272-XXX
System IRQ5 failure |
1. Device on IRQ5
2. System board |
|
001-273-XXX
System IRQ6 (diskette drive) failure |
1. Diskette Cable
2. Diskette drive
3. System board |
|
001-274-XXX
System IRQ7 failure |
1. Device on IRQ7
2. System board |
|
001-275-XXX
System IRQ8 failure |
1. Device on IRQ8
2. System board |
|
001-276-XXX
System IRQ9 failure |
1. Device on IRQ9
2. System board |
|
001-277-XXX
System IRQ10 failure |
1. Device on IRQ10
2. System board |
|
001-278-XXX
System IRQ11 failure |
1. Device on IRQ11
2. System board |
|
001-279-XXX
System IRQ12 failure |
1. Device on IRQ12
2. System board |
|
001-280-XXX
System IRQ13 failure |
1. Device on IRQ13
2. System board |
|
001-281-XXX
System IRQ14 (hard disk drive) failure |
1. Hard disk drive Cable
2. Hard disk drive
3. System board |
|
001-282-XXX
System IRQ15 failure |
1. Device on IRQ15
2. System board |
|
001-286-XXX
001-287-XXX
001-288-XXX
System Timer failure |
1. System board |
|
001-292-XXX
System CMOS RAM error |
1. Run Setup and re-test
2. System board |
|
001-293-XXX
System CMOS Battery |
1. Battery
2. System board |
|
001-298-XXX
System RTC date/time update failure |
1. Flash the system
2. System board |
|
001-299-XXX
System RTC periodic interrupt failure |
1. System board |
|
001-300-XXX
System RTC Alarm failure |
1. System board |
|
001-301-XXX
System RTC Century byte error |
1. Flash the system
2. System board |
|
005-000-XXX
Video Test Passed |
1. No action |
|
005-00X-XXX
Video error |
1. Video card, if installed
2. System board |
|
005-010-XXX
005-011-XXX
005-012-XXX
005-013-XXX
Video Signal failure |
1. Video card, if installed
2. System board |
|
005-016-XXX
Video Simple Pattern test failure |
1. Video Ram
2. Video card, if installed
3. System board |
|
005-024-XXX
Video Addressing test failure |
1. Video card, if installed
2. System board |
|
005-025-XXX
Video Checksum Value error |
1. Video card, if installed
2. System board |
|
005-027-XXX
Video Configuration/Setup error |
1. Run Setup
2. Video drivers update
3. Video card, if installed
4. System board |
|
005-031-XXX
Video Device Cable failure |
1. Video cable
2. Monitor
3. Video card, if installed
4. System board |
|
005-032-XXX
Video Device Controller failure |
1. Video card, if installed
2. System board |
|
005-036-XXX
Video Register error |
1. Video card, if installed
2. System board |
|
005-038-XXX
System BIOS extension failure |
1. Video card, if installed
2. System board |
|
005-040-XXX
Video IRQ failure |
1. Video card, if installed
2. System board |
|
005-195-XXX
Video Test aborted by user |
1. Information
2. Re-start the test, if need to |
|
005-196-XXX
Video test halt, error threshold exceeded |
1. Press F3 to review the log file.
See "Viewing the Test Log"
2. Re-start the test to reset the log file. |
|
005-197-XXX
Video test warning |
1. Make sure component that is called
out is enabled and/or connected
2. Re-run test
3. Component that is called out in warning
statement
4. Component under test |
|
005-198-XXX
Video test aborted |
1. If a component is called out, make sure
it is enabled and/or connected
2. Flash the system and re-test
3. Go to "Undetermined Problems". |
|
005-199-XXX
Video test failed, cause unknown |
1. Go to "Undetermined Problems".
2. Flash the system and re-test
3. Replace component under function test. |
|
005-2XX-XXX
005-3XX-XXX
Video subsystem error |
1. Video card, if installed
2. System board |
|
006-000-XXX
Diskette interface Test Passed |
1. No action |
|
006-0XX-XXX
Diskette interface error |
1. Diskette drive Cable
2. Diskette drive
3. System board |
|
006-195-XXX
Diskette interface
Test aborted by user |
1. Information
2. Re-start the test, if need to |
|
006-196-XXX
Diskette interface test halt, error threshold exceeded |
1. Press F3 to review the log file. See
"Viewing the Test Log"
2. Re-start the test to reset the log file. |
|
006-197-XXX
Diskette interface test warning |
1. Make sure component that is
called out is enabled and/or connected
2. Re-run test
3. Component that is called out in warning
statement
4. Component under test |
|
006-198-XXX
Diskette interface test aborted |
1. If a component is called out, make sure
it is enabled and/or connected
2. Flash the system and re-test
3. Go to "Undetermined Problems" |
|
006-199-XXX
Diskette interface test failed,
cause unknown |
1. Go to "Undetermined Problems"
2. Flash the system and re-test
3. Replace component under function test. |
|
006-25X-XXX
Diskette interface Error |
1. Diskette drive Cable
2. Diskette drive
3. System board |
|
011-000-XXX
Serial port Interface Test Passed |
1. No action |
|
011-001-XXX
Serial port Presence |
1. Remove external serial device, if
present
2. Run setup, enable port
3. System board |
|
011-002-XXX
011-003-XXX
Serial port Timeout/Parity error |
1. System board |
|
011-013-XXX
011-014-XXX
Serial port Control
Signal/Loopback test failure |
1. System board |
|
011-015-XXX
Serial port External
Loopback failure |
1. Wrap plug
2. System board |
|
011-027-XXX
Serial port Configuration/Setup error |
1. Run Setup, enable port
2. Flash the system
3. System board |
|
011-03X-XXX
011-04X-XXX
Serial port failure |
1. System board |
|
011-195-XXX
Serial port Test aborted by user |
1. Information
2. Re-start the test, if need to |
|
011-196-XXX
Serial port test halt, error
threshold exceeded |
1. Press F3 to review the log file. See
"Viewing the Test Log"
2. Re-start the test to reset the log file. |
|
011-197-XXX
Serial port test warning |
1. Make sure component that is called
out is enabled and/or connected
2. Re-run test
3. Component that is called out in warning
statement
4. Component under test |
|
011-198-XXX
Serial port test aborted |
1. If a component is called out, make sure
it is enabled and/or connected
2. Flash the system and re-test
3. Go to "Undetermined Problems" |
|
011-199-XXX
Serial port test failed, cause
unknown |
1. Go to "Undetermined Problems"
2. Flash the system and re-test
3. Replace component under function test. |
|
011-2XX-XXX
Serial port signal failure |
1. External serial device
2. System board |
|
014-000-XXX
Parallel port Interface Test Passed |
1. No action |
|
014-001-XXX
Parallel port Presence |
1. Remove external parallel device, if
present
2. Run setup, enable port
3. System board |
|
014-002-XXX
014-003-XXX
Parallel port Timeout/Parity error |
1. System board |
|
014-013-XXX
014-014-XXX
Parallel port Control
Signal/Loopback test failure |
1. System board |
|
014-015-XXX
Parallel port External
Loopback failure |
1. Wrap plug
2. System board |
|
014-027-XXX
Parallel port
Configuration/Setup error |
1. Run Setup, enable port
2. Flash the system
3. System board |
|
014-03X-XXX
014-04X-XXX
Parallel port failure |
1. System board |
|
014-195-XXX
Parallel port Test aborted by user |
1. Information
2. Re-start the test, if need to |
|
014-196-XXX
Parallel port test halt, error
threshold exceeded |
1. Press F3 to review the log file. See
"Viewing the Test Log"
2. Re-start the test to reset the log file. |
|
014-197-XXX
Parallel port test warning |
1. Make sure component that is called
out is enabled and/or connected
2. Re-run test
3. Component that is called out in warning
statement
4. Component under test |
|
014-198-XXX
Parallel port test aborted |
1. If a component is called out, make sure
it is enabled and/or connected
2. Flash the system and re-test
3. Go to "Undetermined Problems". |
|
014-199-XXX
Parallel port test failed, cause unknown |
1. Go to "Undetermined Problems".
2. Flash the system and re-test
3. Replace component under function test. |
|
014-2XX-XXX
014-3XX-XXX
Parallel port failure |
1. External parallel device
2. System board |
|
015-000-XXX
USB port Interface Test Passed |
1. No action |
|
015-001-XXX
USB port Presence |
1. Remove USB Device(s) and re-test
2. System board |
|
015-002-XXX
USB port Timeout |
1. Remove USB Device(s) and re-test
2. System board |
|
015-015-XXX
USB port External Loopback failure |
1. Remove USB Device(s) and re-test
2. System board |
|
015-027-XXX
USB port Configuration/Setup error |
1. Flash the system
2. System board |
|
015-032-XXX
USB port Device Controller failure |
1. System board |
|
015-034-XXX
USB port buffer allocation failure |
1. Reboot the system
2. Flash the system
3. Run memory test
4. System board |
|
015-035-XXX
USB port Reset condition detected |
1. Remove USB Device(s) and re-test
2. System board |
|
015-036-XXX
USB port Register error |
1. System board |
|
015-040-XXX
USB port IRQ failure |
1. Run setup and check for conflicts
2. Flash the system
3. System board |
|
015-195-XXX
USB port Test aborted by user |
1. Information
2. Re-start the test, if need to |
|
015-196-XXX
USB port test halt, error
threshold exceeded |
1. Press F3 to review the log file. See
"Viewing the Test Log"
2. Re-start the test to reset the log file. |
|
015-197-XXX
USB port test warning |
1. Make sure component that is called
out is enabled and/or connected
2. Re-run test
3. Component that is called out in warning
statement
4. Component under test |
|
015-198-XXX
USB port test aborted |
1. If a component is called out, make sure
it is enabled and/or connected
2. Flash the system and re-test
3. Go to "Undetermined Problems". |
|
015-199-XXX
USB port test failed, cause unknown |
1. Go to "Undetermined Problems"
2. Flash the system and re-test
3. Replace component under function test. |
|
018-000-XXX
PCI Card Test Passed |
1. No action |
|
018-0XX-XXX
PCI Card Failure |
1. PCI card
2. Riser card, if installed
3. System board |
|
018-195-XXX
PCI Card Test aborted by user |
1. Information
2. Re-start the test, if need to |
|
018-196-XXX
PCI Card test halt, error
threshold exceeded |
1. Press F3 to review the log file. See
"Viewing the Test Log"
2. Re-start the test to reset the log file. |
|
018-197-XXX
PCI Card test warning |
1. Make sure component that is called
out is enabled and/or connected
2. Re-run test
3. Component that is called out in warning
statement
4. Component under test |
|
018-198-XXX
PCI Card test aborted |
1. If a component is called out, make sure
it is enabled and/or connected
2. Flash the system and re-test
3. Go to "Undetermined Problems". |
|
018-199-XXX
PCI Card test failed, cause unknown |
1. Go to "Undetermined Problems"
2. Flash the system and re-test
3. Replace component under function test. |
|
018-250-XXX
PCI Card Services error |
1. PCI card
2. Riser card, if installed
3. System board |
|
020-000-XXX
PCI Interface Test Passed |
1. No action |
|
020-0XX-XXX
PCI Interface error |
1. PCI card
2. Riser card, if installed
3. System board |
|
020-195-XXX
PCI Test aborted by user |
1. Information
2. Re-start the test, if need to |
|
020-196-XXX
PCI test halt, error threshold
exceeded |
1. Press F3 to review the log file. See
"Viewing the Test Log"
2. Re-start the test to reset the log file. |
|
020-197-XXX
PCI test warning
|
1. Make sure component that is called
out is enabled and/or connected
2. Re-run test
3. Component that is called out in warning
statement
4. Component under test |
|
020-198-XXX
PCI test aborted |
1. If a component is called out, make sure
it is enabled and/or connected
2. Flash the system and re-test
3. Go to "Undetermined Problems". |
|
020-199-XXX
PCI test failed, cause unknown |
1. Go to "Undetermined Problems"
2. Flash the system and re-test
3. Replace component under function test. |
|
020-262-XXX
PCI system error |
1. PCI card
2. Riser card, if installed
3. System board |
|
025-000-XXX
IDE interface Test Passed |
1. No action |
|
025-00X-XXX
025-01X-XXX
IDE interface failure |
1. IDE signal cable
2. Check power supply
3. IDE device
4. System board |
|
025-027-XXX
IDE interface
Configuration/Setup error |
1. IDE signal cable
2. Flash the system
3. IDE device
4. System board |
|
025-02X-XXX
025-03X-XXX
025-04X-XXX
IDE Interface failure |
1. IDE signal cable
2. Check power supply
3. IDE device
4. System board |
|
025-195-XXX
IDE interface Test aborted by user |
1. Information
2. Re-start the test, if need to |
|
025-196-XXX
IDE interface test halt, error threshold exceeded |
1. Press F3 to review the log file.
See "Viewing the Test Log on page 14.
2. Re-start the test to reset the log file. |
|
025-197-XXX
IDE interface test warning |
1. Make sure component that is called
out is enabled and/or connected
2. Re-run test
3. Component that is called out in
warning statement
4. Component under test |
|
025-198-XXX
IDE interface test aborted |
1. If a component is called out, make sure
it is enabled and/or connected
2. Flash the system and re-test
3. Go to "Undetermined Problems". |
|
025-199-XXX
IDE interface test failed, cause unknown |
1. Go to "Undetermined Problems".
2. Flash the system and re-test
3. Replace component under function test. |
|
030-000-XXX
SCSI interface Test Passed |
1. No action |
|
030-00X-XXX
030-01X-XXX
SCSI interface failure |
1. SCSI signal cable
2. Check power supply
3. SCSI device
4. SCSI adapter card, if installed
5. System board |
|
030-027-XXX
SCSI interface
Configuration/Setup error |
1. SCSI signal cable
2. Flash the system
3. SCSI device
4. SCSI adapter card, if installed
5. System board |
|
030-03X-XXX
030-04X-XXX
SCSI interface error |
1. SCSI signal cable
2. Check power supply
3. SCSI device
4. SCSI adapter card, if installed
5. System board |
|
030-195-XXX
SCSI interface Test aborted by user |
1. Information
2. Re-start the test, if need to |
|
030-196-XXX
SCSI interface test halt, error threshold
exceeded |
1. Press F3 to review the log file.
See "Viewing the Test Log".
2. Re-start the test to reset the log file. |
|
030-197-XXX
SCSI interface test warning |
1. Make sure component that is called
out is enabled and/or connected
2. Re-run test
3. Component that is called out in warning
statement
4. Component under test |
|
030-198-XXX
SCSI interface test aborted |
1. If a component is called out, make sure
it is enabled and/or connected
2. Flash the system and re-test
3. Go to "Undetermined Problems" |
|
030-199-XXX
SCSI interface test failed,
cause unknown |
1. Go to "Undetermined Problems"
2. Flash the system and re-test
3. Replace component under function test. |
|
035-000-XXX
RAID interface Test Passed |
1. No action |
|
035-0XX-XXX
RAID interface Failure |
1. RAID signal cable
2. RAID device
3. RAID adapter card, if installed
4. System board |
|
035-195-XXX
RAID interface Test aborted by user |
1. Information
2. Re-start the test, if need to |
|
035-196-XXX
RAID interface test halt,
error threshold exceeded |
1. Press F3 to review the log file. See
"Viewing the Test Log"
2. Re-start the test to reset the log file. |
|
035-197-XXX
RAID interface test warning |
1. Make sure component that is called
out is enabled and/or connected
2. Re-run test
3. Component that is called out in
warning statement
4. Component under test |
|
035-198-XXX
RAID interface test aborted |
1. If a component is called out, make sure
it is enabled and/or connected
2. Flash the system and re-test
3. Go to "Undetermined Problems" |
|
035-199-XXX
RAID interface test failed, cause
unknown |
1. Go to Undetermined Problems
2. Flash the system and re-test
3. Replace component under function test. |
|
071-000-XXX
Audio port Interface Test
Passed |
1. No action |
|
071-00X-XXX
071-01X-XXX
071-02X-XXX
Audio port error |
1. Run Setup
2. Flash the system
3. System board |
|
071-03X-XXX
Audio port failure |
1. Speakers
2. Microphone
3. Audio card, if installed
4. System board |
|
071-04X-XXX
Audio port failure |
1. Run Setup
2. Audio card, if installed
3. System board |
|
071-195-XXX
Audio port Test aborted by user |
1. Information
2. Re-start the test, if need to |
|
071-196-XXX
Audio port test halt, error
threshold exceeded |
1. Press F3 to review the log file. See
"Viewing the Test Log"
2. Re-start the test to reset the log file. |
|
071-197-XXX
Audio port test warning |
1. Make sure component that is called
out is enabled and/or connected
2. Re-run test
3. Component that is called out in warning
statement
4. Component under test |
|
071-198-XXX
Audio port test aborted |
1. If a component is called out, make sure
it is enabled and/or connected
2. Flash the system and re-test
3. Go to "Undetermined Problems" |
|
071-199-XXX
Audio port test failed, cause unknown |
1. Go to Undetermined Problems
2. Flash the system and re-test
3. Replace component under function test. |
|
071-25X-XXX
Audio port failure |
1. Speakers
2. Audio card, if installed
3. System board |
|
080-000-XXX
Game Port interface Test Passed |
1. No action |
|
080-XXX-XXX
Game Port interface Error |
1. Remove the game port device and
re-test the system |
|
080-195-XXX
Game Port interface
Test aborted by user |
1. Information
2. Re-start the test, if need to |
|
080-196-XXX
Game Port interface test halt,
error threshold exceeded |
1. Press F3 to review the log file.
See "Viewing the Test Log".
2. Re-start the test to reset the log file. |
|
080-197-XXX
Game Port interface test warning |
1. Make sure component that is called
out is enabled and/or connected
2. Re-run test
3. Component that is called out in warning
statement
4. Component under test |
|
080-198-XXX
Game Port interface test aborted |
1. If a component is called out, make sure
it is enabled and/or connected
2. Flash the system and re-test
3. Go to "Undetermined Problems" |
|
080-199-XXX
Game Port interface test failed,
cause unknown |
1. Go to "Undetermined Problems"
2. Flash the system and re-test
3. Replace component under function test. |
|
086-000-XXX
Mouse Port interface Test Passed |
1. No action |
|
086-001-XXX
Mouse Port interface Presence |
1. Mouse
2. System board |
|
086-032-XXX
Mouse Port interface Device
controller failure |
1. Mouse
2. System board |
|
086-035-XXX
Mouse Port interface Reset |
1. Mouse
2. System board |
|
086-040-XXX
Mouse Port interface IRQ
failure |
1. Run Setup
2. Mouse
3. System board |
|
086-195-XXX
Mouse Port interface Test aborted by user |
1. Information
2. Re-start the test, if need to |
|
086-196-XXX
Mouse Port interface test halt,
error threshold exceeded |
1. Press F3 to review the log file.
See "Viewing the Test Log".
2. Re-start the test to reset the log file. |
|
086-197-XXX
Mouse Port interface test warning |
1. Make sure component that is called
out is enabled and/or connected
2. Re-run test
3. Component that is called out in
warning statement
4. Component under test |
|
086-198-XXX
Mouse Port interface test aborted |
1. If a component is called out, make
sure it is enabled and/or connected
2. Flash the system and re-test
3. Go to "Undetermined Problems". |
|
086-199-XXX
Mouse Port interface test failed, cause unknown |
1. Go to "Undetermined Problems"
2. Flash the system and re-test
3. Replace component under function test. |
|
089-000-XXX
Microprocessor Test Passed |
1. No action |
|
089-XXX-XXX
Microprocessor failure |
1. Microprocessor(s)
2. System board |
|
089-195-XXX
Microprocessor Test aborted by user |
1. Information
2. Re-start the test, if need to |
|
089-196-XXX
Microprocessor test halt, error threshold exceeded |
1. Press F3 to review the log file.
See "Viewing the Test Log".
2. Re-start the test to reset the log file. |
|
089-197-XXX
Microprocessor test warning |
1. Make sure component that is called
out is enabled and/or connected
2. Re-run test
3. Component that is called out in warning
statement
4. Component under test |
|
089-198-XXX
Microprocessor test aborted |
1. If a component is called out, make sure
it is enabled and/or connected
2. Flash the system and re-test
3. Go to "Undetermined Problems" |
|
089-199-XXX
Microprocessor test failed, cause unknown |
1. Go to "Undetermined Problems"
2. Flash the system and re-test
3. Replace component under function test. |
|
170-000-XXX
Voltage Sensor(s) Test Passed |
1. No action |
|
170-0XX-XXX
Voltage Sensor(s) failure |
1. Flash system
2. System board |
|
170-195-XXX
Voltage Sensor(s) Test aborted by user |
1. Information
2. Re-start the test, if need to |
|
170-196-XXX
Voltage Sensor(s) test halt, error threshold exceeded |
1. Press F3 to review the log file.
See "Viewing the Test Log"
2. Re-start the test to reset the log file. |
|
170-197-XXX
Voltage Sensor(s) test warning |
1. Make sure component that is called
out is enabled and/or connected
2. Re-run test
3. Component that is called out in
warning statement
4. Component under test |
|
170-198-XXX
Voltage Sensor(s) test aborted |
1. If a component is called out, make sure
it is enabled and/or connected
2. Flash the system and re-test
3. Go to "Undetermined Problems" |
|
170-199-XXX
Voltage Sensor(s) test failed, cause unknown |
1. Go to "Undetermined Problems"
2. Flash the system and re-test
3. Replace component under function test. |
|
170-250-XXX
170-251-XXX
Voltage Sensor(s) Voltage limit error |
1. Power supply
2. System board |
|
170-254-XXX
Voltage Sensor(s) Voltage
Regulator Module error |
1. Voltage Regulator Module (VRM)
2. Microprocessor
3. System board |
|
175-000-XXX
Thermal Sensor(s) Test
Passed |
1. No action |
|
175-0XX-XXX
Thermal Sensor(s) failure |
1. Flash system
2. System board |
|
175-195-XXX
Thermal Sensor(s) Test
aborted by user |
1. Information
2. Re-start the test, if need to |
|
175-196-XXX
Thermal Sensor(s) test halt,
error threshold exceeded |
1. Press F3 to review the log file. See
"Viewing the Test Log"
2. Re-start the test to reset the log file. |
|
175-197-XXX
Thermal Sensor(s) test warning |
1. Make sure component that is called
out is enabled and/or connected
2. Re-run test
3. Component that is called out in
warning statement
4. Component under test |
|
175-198-XXX
Thermal Sensor(s) test aborted |
1. If a component is called out, make sure
it is enabled and/or connected
2. Flash the system and re-test
3. Go to "Undetermined Problems" |
|
175-199-XXX
Thermal Sensor(s) test failed,
cause unknown |
1. Go to "Undetermined Problems"
2. Flash the system and re-test
3. Replace component under function test. |
|
175-250-XXX
175-251-XXX
Thermal Sensor(s) limit error |
1. Check fans
2. Check Power supply
3. Microprocessor
4. System board |
|
185-000-XXX
Asset Security Test Passed |
1. No action |
|
185-XXX-XXX
Asset Security failure |
1. Assure Asset Security Enabled
2. Flash system
3. System board |
|
185-278-XXX
Asset Security Chassis Intrusion |
1. C2 Cover Switch
2. System board |
|
201-000-XXX
System Memory Test Passed |
1. No action |
|
201-XXX-XXX
System Memory error |
1. Replace the memory module called
out by the test
2. System board |
|
202-000-XXX
System Cache Test Passed |
1. No action |
|
202-XXX-XXX
System Cache error |
1. Cache, if removable
2. System board
3. Microprocessor |
|
206-000-XXX
Diskette Drive Test Passed |
1. No action |
|
206-XXX-XXX
Diskette Drive error |
1. Diskette Drive Cable
2. Check power supply voltages
3. Diskette drive
4. System board |
|
215-000-XXX
CD-ROM Drive Test Passed |
1. No action |
|
215-XXX-XXX
CD-ROM Drive error |
1. CD-ROM Drive Cable
2. Check power supply voltages
3. CD-ROM drive
4. System board |
|
217-000-XXX
Hard Disk Drive Test Passed |
1. No action |
|
217-25X-XXX
217-26X-XXX
Hard Disk Drive (IDE) error |
1. Hard Disk Drive Cable
2. Check power supply voltages
3. Hard Disk drive (IDE)
4. System board |
|
217-28X-XXX
217-29X-XXX
Hard Disk Drive (SCSI) error |
1. Hard Disk Drive Cable
2. Check power supply voltages
3. Hard Disk drive (SCSI)
4. SCSI adapter card
5. System board |
|
220-000-XXX
Hi-Capacity Cartridge Drive
Test Passed |
1. No action |
|
220-XXX-XXX
Hi-Capacity Cartridge Drive error |
1. Remove the Hi-Capacity Cartridge
Drive and re-test the system |
|
301-000-XXX
Keyboard Test Passed |
1. No action |
|
301-XXX-XXX
Keyboard error |
1. Keyboard
2. Check and test Mouse
3. System board |
|
302-000-XXX
Mouse Test Passed |
1. No action |
|
302-XXX-XXX
Mouse error |
1. Mouse
2. Check and test Keyboard
3. System board |
|
303-000-XXX
Joystick Test Passed |
1. No action |
|
303-XXX-XXX
Joystick error |
1. Remove the Joystick and re-test
the system |
|
305-000-XXX
Monitor DDC Test Passed |
1. No action |
|
305-250-XXX
Monitor DDC self test failure |
1. Run Setup to enable DDC
2. Cable
3. Monitor
4. Video card
5. System board |
|
415-000-XXX
Modem Test Passed |
1. No action |
|
415-XXX-XXX
Modem error |
1. Remove the Modem and re-test the
system |
