|
2.251 bytes |
Product Information |
Document ID: DDSE-458KNB |
PC Server 320 - EISA, ISA, and PCI Adapters
Applicable to: World-Wide
EISA, ISA, and PCI Adapters
Before installing a new device or program, read the documentation supplied with it. Reading the instructions helps you determine the steps required for installation and configuration. The following list provides a preview of the actions that might be required to configure the server.
When installing different types of adapters at the same time, install and configure them in the following sequence:
1. ISA
2. EISA
3. PCI
Note:
During POST, the server automatically configures ISA Plug and Play and PCI devices.
1. Run the Setup program and record the current configuration settings.
2. Backup the EISA Configuration Diskette. See 'Backing Up the EISA Configuration Diskette—.
3. Start the EISA Configuration Diskette and:
a. Record the current settings.
b. Install configuration files (.CFG).
Note:
If the .CFG files were not supplied with the adapter, see 'Files.—
See 'Recording EISA Configuration Settings— and 'Starting the EISA Configuration Diskette—.
4. Set jumpers or switches on the server system board. See 'Jumpers—.
5. Set jumpers or switches on the device. See the instructions supplied with the adapter.
6. Install the adapter in the server.
7. Install software programs. See the installation instructions supplied with the software.
8. Resolve configuration conflicts.
|
Search Keywords |
| |
|
Document Category |
Configuration | |
|
Date Created |
18-02-99 | |
|
Last Updated |
18-02-99 | |
|
Revision Date |
18-02-2000 | |
|
Brand |
IBM PC Server | |
|
Product Family |
PC Server 320 | |
|
Machine Type |
8640 | |
|
Model |
| |
|
TypeModel |
| |
|
Retain Tip (if applicable) |
| |
|
Reverse Doclinks |