|
6.432 bytes |
Service Hints & Tips |
Document ID: CPES-38LFRJ |
Servers - RAID level descriptions
Applicable to: World-Wide
RAID Level 0
Characteristics:
Data is striped across all drives
Drive spindles need not be synchronised
Number of drives and performance is scalable.
Error Recovery:
No parity information stored on the drives.
Data recovery is limited to the drive electronics
The only way to recover the data is to use system backups
Advantages:
High I/O transaction rate
Multiple simultaneous seeks improve speed
Transparent to system software
Faster in smaller server applications
Load is balanced across all drives
Disadvantages:
No parity or redundancy
No increase in data availability
RAID Level 1
Error Recovery:
Error recovery is through the mirrored drive
Characteristics:
Data duplicated on mirrored drives
Drive spindles are not synchronised
Performance is a function of the number of drives
Load is not balanced across the drives
Advantages:
Maximum data availability
Transparent to system software
No performance penalty after a drive failure
Disadvantages:
100% cost overhead
Requires twice the space and power
RAID Level 2
Error Recovery:
Errors are corrected by recalculating the failed bit from the ECC data stored in the array
Characteristics:
Data is spread across all the drives
Drive spindles must be synchrinised
The larger the array, the more efficient the storage capacity of the
array
Data is corrected by the controller on the fly
Advantages:
High data transfer rate
High data security, as data on any single dive is useless
High data availability
Transparent to system software
Disadvantages:
Poor for transaction processing
High cost for small arrays
Special drives/drivers/operating systems required
RAID Level 3
Error Recovery:
Error recovery is through the use of parity information stored on dedicated drive
Performed automatically by the disk controller
Characteristics:
Data is spread acroos all the drives in bytes
Drive spindles must be synchronised
Number of drives and performance is scalable
Suited for large file transfers
Suitable for workstations that require fast sequential access to a single
large file
Advantages:
Highest data transfer rate of any RAID level
Increased reliability and data availability
Disadvantages:
Poor performance for small block transfers
Slower than RAID-5 for transaction processing
Unsuitable for a multi-tasking system
May create integration problems [Logical block write size = (number of
drives) * (drive sector size)
RAID Level 4
Error Recovery:
Error recovery is through the use of parity information stored on dedicated drive Done automatically
Characteristics:
Data is spread across all the drives in blocks
Drive spindles are not synchronised
Dedicated parity drive
Independant actuators
Number of drives and performance is scalable
Advantages:
Good performance for reads during transaction processing
Multiple actuator seeks improve speed
Increased reliability and data availability
Disadvantages:
Poor performance for write operations
Slower than RAID-5 for transaction processing
Parity disk bottleneck
Performance degradation during data reconstruction
RAID Level 5
Error Recovery:
Error recovery is through the use of parity information distributed across multiple drives.
Done automatically by the disk controller
Characteristics:
Data is spread across all the drives in blocks
Drive spindles are not synchronized
Parity is spread across all drives
Independant actuators
Advantages:
Good performance for all transaction processing systems
Multiple actuator seeks improve speed
Increased reliability and data availability
Transparent to system software
Increased reliability with minimal drive cost
Disadvantages:
Performance degradation during data reconstruction
RAID Level 6
Error Recovery:
Error recovery is through the use of mirrored drives
Characteristics:
Data is spread and striped across all the drives in blocks
Data is duplicated across two SCSI buses
Drive spindles are not synchronised
Number of drives and performance is scalable
Advantages:
Highest I/O transaction rateof any RAID level
Multiple actuator seeks improve speed
Maximum data availability
Transparent to system software
No performance penalty after a drive failure
No performance penalty in high write environments
Disadvantages:
An instant 100% cost overhead
Twice the space and power requirements
|
Search Keywords |
| |
|
Hint Category |
Hard Drives | |
|
Date Created |
14-05-96 | |
|
Last Updated |
11-01-99 | |
|
Revision Date |
11-01-2000 | |
|
Brand |
IBM PC Server | |
|
Product Family |
Servers | |
|
Machine Type |
Various | |
|
Model |
| |
|
TypeModel |
| |
|
Retain Tip (if applicable) |
| |
|
Reverse Doclinks |