|
2.723 bytes |
Service Hints & Tips |
Document ID: DETR-3TAQA6 |
Aptiva - 2144/2168 Flash (BIOS) Update Procedure
Applicable to: World-Wide
Flash (BIOS) Update Procedure:
Attention:
The system board Flash Enable jumper default position is set to enabled. If the following flash procedure does not work, verify that the Flash Enable jumper is set to the enabled position.
Also, check the Flash diskette for a README file and if present, review it for any model-specific information.
1. Power-off the computer.
2. Insert the Flash diskette into diskette drive A.
3. Power-on the computer.
4. Follow the instructions on the screen to complete the flash (BIOS) update procedure.
|
Search Keywords |
| |
|
Hint Category |
BIOS, Software Installation/Configuration | |
|
Date Created |
24-09-96 | |
|
Last Updated |
23-03-99 | |
|
Revision Date |
23-03-2000 | |
|
Brand |
IBM Aptiva | |
|
Product Family |
Aptiva | |
|
Machine Type |
2144, 2168 | |
|
Model |
| |
|
TypeModel |
| |
|
Retain Tip (if applicable) |
| |
|
Reverse Doclinks |