|
3.014 bytes |
Service Hints & Tips |
Document ID: DJON-3G5KR7 |
Aptiva - Converting from DoubleSpace or DriveSpace to Stacker
Applicable to: United States
If you are installing PC-DOS 7.0 on your system, Stacker will be able to use DoubleSpace or DriveSpace compressed drives without a problem. During installation, Stacker will offer to convert the compressed drives to the Stacker format, and it is recommended that this be done. This will provide you with better disk compression in most cases, plus it will allow the Stacker driver to be loaded in CONFIG.SYS to replace the DBLSPACE.BIN driver. This will result in a substantial decrease in the amount of memory needed for the driver.
|
Search Keywords |
DOS | |
|
Hint Category |
DOS/Windows 3.x, Utility Software, Software Installation/Configuration | |
|
Date Created |
14-04-97 | |
|
Last Updated |
22-03-99 | |
|
Revision Date |
22-03-2000 | |
|
Brand |
IBM Aptiva | |
|
Product Family |
Aptiva | |
|
Machine Type |
2144, 2168 | |
|
Model |
5R5; M91; 21442R5; 2R7; 2R8; M30; M35; M50; 2R6; 4R7; 4R8; M40; M54; M58; 3R0; 3R8; M60; M70; 1R2; 66P; 67P; 86P; OR8; 1R1; 1R3; 1R5; 22P; 24P; 25P; 27P; 29P; 63P; 67P; 82P; 83P; OR6; OR7; OR9; 1R0; 1R1; 26P; 62P; 2R0; P30; 2R3; S15 | |
|
TypeModel |
21445R5 | |
|
Retain Tip (if applicable) |
| |
|
Reverse Doclinks |