|
2.583 bytes |
Service Hints & Tips |
Document ID: GSMH-39TFH7 |
IBM PC330/PC350 - "Setup Not Completed Successfully" message on initial startup
Applicable to: World-Wide
Symptom:
IBM PC 300 Series 6577 & 6587 systems preloaded with Microsoft Windows NT 3.51 may display a "Setup Not Completed Successfully" message on the initial startup of the system (out-of-box failure).
Problem Isolation Aids:
If the "Setup Not Completed Successfully" message is displayed, there is no option to bypass the error and continue to perform the WindowsNT setup routine.
Fix:
The cause of the failure is the system was powered-on at some point after manufacture and allowed to IPL. The initial IPL of a system with a Windows NT preload performs a setup routine which MUST be completed once started. Systems exhibiting this failure were not allowed to complete the setup routine.
A diskette which allows the system to continue with the Windows NT setup routine is available. For a copy of this diskette please double-click here:
Note: Windows NT is a trademark of the Microsoft Corporation.
SAS KEYWORDS:
PSVP PSY2 PSVPERR PSY2ERR
PSVPPROG PSY2PROG PC 330 IBMPC
PC 330 PC 350 D/T6587 52791
|
Search Keywords |
| |
|
Hint Category |
Retain, Windows NT | |
|
Date Created |
24-09-96 | |
|
Last Updated |
30-04-98 | |
|
Revision Date |
22-04-99 | |
|
Brand |
IBM PC | |
|
Product Family |
PC 330, PC 350 | |
|
Machine Type |
6577, 6587 | |
|
Model |
Various | |
|
TypeModel |
| |
|
Retain Tip (if applicable) |
H133949 | |
|
Reverse Doclinks |