2.613 bytes

Product Information

Document ID: DDSE-42CSFK

Netfinity 3000 - Undetermined Problems

Applicable to: World-Wide

Undetermined Problems
You are here because the diagnostic tests did not identify the failure, the Devices List is incorrect, or the system is inoperative.

Notes If you suspect a software mismatch is causing failures (solid or intermittent), be sure to see "Configuration Conflicts" on page 20.

Check power supply. If the LEDs indicate the power supplies are working correctly, return here and do the following:

1. Power-off the computer.
2. Remove or disconnect the following (one at a time) until you find the failure (power-on the computer and reconfigure each time).
- Any external devices
- Surge suppressor device (on the computer)
- Modem, printer, mouse, or non-IBM devices
- Each adapter
- Drives
- Memory-Module Kits (Minimum requirement = 1 bank of 64 MB DIMMs)

Note Minimum operating requirements vary for each computer. For example, an IML drive in the drive startup sequence (IML systems only).

3. Power-on the computer. If the problem remains, suspect the following FRUs in the order listed:
- System Board
- Processor Board
- Front Panel

Note If the problem goes away when you remove an adapter from the system, and replacing that adapter does not correct the problem, suspect the system board then the processor board(s)

	Search Keywords
	Document Category	Diagnostics
	Date Created	18-11-98
	Last Updated	23-11-98
	Revision Date	18-11-99
	Brand	IBM PC Server
	Product Family	Netfinity 3000
	Machine Type	8476
	Model	ALL
	TypeModel
	Retain Tip (if applicable)
	Reverse Doclinks and Admin Purposes