2.544 bytes |
Service Hints & Tips |
Document ID: MCGN-3ZWM8B |
Netfinity 5000 - Peer to Peer adapter card performance
Applicable to: World-Wide
Source: RETAIN tip H165124
SYMPTOM:
If a card which uses Peer-to-Peer PCI Bus Mastering is used in a Netfinity 5000 server system, performance might be much lower than expected.
PROBLEM ISOLATION AIDS:
- The system is a Netfinity 5000 server, Type 8659, any model.
- The system is configured with a compatible PCI adapter that uses Peer-to-Peer PCI Bus Mastering.
NOTE: To confirm compatibility see the following Web site: http://www.pc.ibm.com/us/compat/
FIX:
It is strongly recommended that both the master and the card it is accessing are installed in the same PCI bus. Practically this means that they should be in slots 1-4 as slot 5 is on a different bus. If this advice is not followed, performance will be very seriously affected, and some data corruption may theoretically occur (though none has been observed in any adapters that have been tested).
SAS KEYWORDS:
PSY2, D/T8659, NETFINITY, UNCLASSIFIED, PCI, BUSMASTERING, SLOT5, PERFORMANCE, 8659ADPT, 8659MISC, BRIDGE
Search Keywords |
PSY2, D/T8659, NETFINITY, UNCLASSIFIED, PCI, BUSMASTERING, SLOT5, PERFORMANCE, 8659ADPT, 8659MISC, BRIDGE | |
Hint Category |
Retain | |
Date Created |
04-11-98 | |
Last Updated |
14-01-99 | |
Revision Date |
14-01-2000 | |
Brand |
IBM PC Server | |
Product Family |
Netfinity 5000 | |
Machine Type |
8659 | |
Model |
ALL | |
TypeModel |
| |
Retain Tip (if applicable) |
H165124 | |
Reverse Doclinks |
Date last altered: A98/11/02 |