3.203 bytes

Service Hints & Tips

Document ID: LWIK-3YGND6

TP 600/E - Peripheral, power, and other related symptoms

Applicable to: World-Wide

The following information is intended for IBM Dealers and Authorized Servicers only. Customers attempting to follow any of the procedures below may void their warranty.

Peripheral-Device-Related Symptoms

Symptom / Error	FRU / Action in Sequence
The external monitor does not work correctly.	Connect the external monitor to another PC. If the monitor works fine, replace the system board. If not, replace the external monitor.
Printer problems.	1. Run printer self-test. 2. Run parallel port wrap test. 3. System board 4. Printer cable
Serial or parallel port device problems.	1. Run serial/parallel port wrap test. 2. Device 3. System board 4. Device cable

Power-Related Symptoms

Symptom / Error	FRU / Action in Sequence
Power shuts down during operation.	1. Go to Power Systems Checkout in the HMM. 2. Battery pack 3. Remove the battery pack and let it cool for 2 hours. 4. System board 5. Check the power outlet.
The system does not power off. (See Reset Switch on page 7)	1. Press the power shutdown switch. 2. System board

Other Symptoms

Symptom / Error	FRU / Action in Sequence
Errors occur only when the port replicator is used.	See Port Replicator Checkout in the HMM
PC Card slot pin is damaged.	1. PC Card slots assembly

	Search Keywords
	Hint Category	Hardware Maintenance Information
	Date Created	19-09-98
	Last Updated	19-01-99
	Revision Date	19-01-2000
	Brand	IBM ThinkPad
	Product Family	ThinkPad 600, ThinkPad 600E
	Machine Type	2645, 2646
	Model	Various
	TypeModel
	Retain Tip (if applicable)
	Reverse Doclinks and Admin Purposes