|
4.445 bytes |
Service Hints & Tips |
Document ID: VLAR-3DTJGL |
|
This document is provided to IBM and our Business Partners to help sell and/or service IBM products. It is not to be distributed beyond that audience or used for any other purpose. |
3.24GB Deskstar 3 AT HDD - Jumper settings
Applicable to: United States
Products Involved:
75H9918 3.24GB DeskStar 3 ATA Hard Disk Drive
75H9919 3.24GB DeskStar 3 ATA HD BulkPack20
Use a common orientation to configure the jumper settings. Orient the drive so that the drive electronics are showing. Have the electronic interface away from you. Find 7 sets of jumpers toward the far left of the drive. Moving left to right, J1 will be the far left jumper.
(40pin ATA Interface Connection)
---------|-----------|--------
| |
| (drive electronics) |
| |
| |
| : : : : : : : |
|J1J2J3J4J5J6J7---------------|
| |
| |
| |
-----------------------------
J1 = Primary
J2 = Secondary
J3 = Cable Select
J4 = Reserved (open)
J5 = Write Cache (enabled = open / disabled = closed)
J6 = Reserved (open)
J7 = Reserved (open)
Parameters:
Drive Selection:
|
Size |
CYL |
HD |
SECTOR |
|
2.16GB |
4200 |
16 |
63 |
|
3.24GB |
6296 |
16 |
63 |
Keywords: OBI 75H9918 75H9919 3.24GB Deskstar 3 AT hard drive
|
Search Keywords |
| |
|
Hint Category |
Hard Drives | |
|
Date Created |
30-01-97 | |
|
Last Updated |
18-11-98 | |
|
Revision Date |
18-11-99 | |
|
Brand |
IBM Options | |
|
Product Family |
Hard Drives | |
|
Machine Type |
3.x GB | |
|
Model |
75H9918 | |
|
TypeModel |
| |
|
Retain Tip (if applicable) |
| |
|
Reverse Doclinks |