|
11.812 bytes |
Service Hints & Tips |
Document ID: MNOK-42RN3Y |
Aptiva - 2134 Removals and replacements - Adapter cards
Applicable to: World-Wide
1035ùAdapter Cards
Remove any cables (note location of cables).
Reset jumpers on adapter cards.
Figure 4-9. Adapter Cards
Note: When reinstalling an Mwave or modem adapter card, ensure the Wake Up on Ring cable is connected from the 2-pin keyed connector on the adapter card to the system board. See "System Board LayoutùType A-1" on page 5-2 and "System Board LayoutùType A-2" on page 5-5 for connector locations.
|
Search Keywords |
| |
|
Hint Category |
Adapter Cards, Hardware Installation/Configuration | |
|
Date Created |
01-12-98 | |
|
Last Updated |
10-02-99 | |
|
Revision Date |
10-02-2000 | |
|
Brand |
IBM Aptiva | |
|
Product Family |
Aptiva | |
|
Machine Type |
2134 | |
|
Model |
All | |
|
TypeModel |
| |
|
Retain Tip (if applicable) |
| |
|
Reverse Doclinks |