|
2.689 bytes |
Parts Information |
Document ID: MCGN-3YUGXK |
Netfinity 7000 M10 - Updating system management subsystem microcode
Applicable to: World-Wide
Source: Hardware Maintenance Manual
To update the system management subsystem microcode:
1. From the Options pulldown menu, select Update Microcode... and then select System Management Subsystem.
A file selection window appears.
2. Use the file selection window to select the source disk drive (or diskette drive) and directory where the system management subsystem microcode update is located.
3. Select OK to continue.
4. Warning notices will appear, asking that you verify that you want to continue. Select OK to continue or Cancel to stop the microcode update process.
5. When you have verified that you want to proceed with updating the system management subsystem microcode, the Advanced System Management service will apply the microcode update to the system management subsystem.
During this process, some of the monitoring functions of some system management subsystems (such as the environmental monitors available with the Netfinity 7000 Advanced System Management PCI Adapter) will be disabled. Once the microcode update is complete, all system monitoring will resume.
|
Search Keywords |
| |
|
Document Category |
Advanced Systems Management | |
|
Date Created |
01-10-98 | |
|
Last Updated |
18-01-99 | |
|
Revision Date |
18-01-2000 | |
|
Brand |
IBM PC Server | |
|
Product Family |
Netfinity 7000 M10 | |
|
Machine Type |
8680 | |
|
Model |
all | |
|
TypeModel |
| |
|
Retain Tip (if applicable) |
| |
|
Reverse Doclinks |