12.839 bytes |
Service Hints & Tips |
Document ID: GKEY-3H3K4D |
PCServer704 - System Configuration Utility Default Settings
Applicable to: World-Wide
System Configuration Utility Default Settings
The following are the System Configuration Utility program settings at the time it was shipped.
The settings may have been changed by the customer.
Menu Options |
Default Value |
System |
Group |
System Identification and |
Version Information |
System Identification String |
None |
Config and Ovelay Version | |
BIOS Version String | |
MP Sec. Version |
1.1 |
System Processor Status | |
1st Processor Status, Module 1 |
No Failures detected |
2nd Processor Status, Module 1 |
No failures detected |
3rd Processor Status, Module 2 |
No failures detected |
4th Processor Status, Module 2 |
No failures detected |
System Performance | |
Power-on Speed |
Fast |
Secondary IOAPIC control |
Disable |
Memory Subsystem | |
Base Memory Option |
640 KB |
Shadowing ISA ROMs Options |
(Menu) |
Extended Memory Options |
(Menu) |
Peripheral Configuration |
Group |
Automatic Configuration |
Enable |
Onboard Disk Controllers | |
Onboard Floppy Controller |
Enable |
Onboard Communications Devices | |
Serial Port 1 Configuration |
Serial Port 1 Address and IRQ |
Serial Port 2 Configuration |
Serial Port 2 Address and IRQ |
Parallel Port Configuration |
Parallel Port Address and IRQ |
Parallel Port Mode |
Parallel port mode |
Parallel Port DMA |
Valid only with ECP mode |
Floppy Subsystem Group | |
Floppy drive A Options |
Size and capacity |
Floppy drive B Options |
Size and capacity |
Language Support Group | |
Language Support options |
Languages supported |
Keyboard/Mouse Subsystem Group | |
NumLock Options |
Off at Boot |
Typematic Speed |
Auto |
Mouse Control Option |
Autodetected |
Console Redirection | |
COM port for redirection |
Disable |
Baud rate |
115.2k |
Hardware Flow Control |
None |
Terminal Type |
ANSI |
Security Subsystem | |
Administrator Password |
Disable |
User Password |
Disable |
Hot-Key Option |
Disable |
Lockout Timer |
10 min. |
Secure Boot Mode |
Disable |
Video Blanking |
Disable |
Boot Subsystem Group | |
First Startup Drive |
Diskette Drive |
Second Startup Drive |
Hard Disk 0 |
Third Startup Drive |
Boot disabled |
Fourth Startup Drive |
Boot Network |
Display '<F1> for Setup— |
Enable |
Require user interaction on POST |
Disable |
SCSI ROM BIOS Options Group | |
SCSI A ROM scan |
Enable |
SCSI B ROM scan |
Enable |
LCD | |
LCD |
Enable |
LC Display String Before OS Boot |
Default |
Management |
Subsystem |
Temperature/Voltage Limit Control |
(Menu) |
A to D Channel Enable Switch |
(Menu) |
Speaker Options |
Enable |
Scan user flash area |
Disable |
System Management |
Options |
System Management Mode |
Disable |
SMM time stamp Source |
POST capture |
Event Logging |
Disable |
Reserve VGA resources |
Reserve VGA memory |
Option |
Default Value |
System Memory |
640KB |
Extended Memory |
360KB |
Bank 1 socket 1 |
16MB (Non RAID and Disk Array Models) |
32MB (Open bay models) | |
Bank 1 socket 2 |
16MB (Non RAID and Disk Array models) |
32MB (Open bay models) | |
Bank 1 socket 3 |
16MB (Non RAID and Disk Array models) |
32MB (Open bay models) | |
Bank 1 socket 4 |
16MB (Non RAID and Disk Array models) |
32MB (Open bay models) | |
Bank 1 socket 5 |
16MB (Disk Array models) |
Bank 1 socket 6 |
16MB (Disk Array models) |
Bank 1 socket 7 |
16MB (Disk Array models) |
Bank 1 socket 8 |
16MB (Disk Array models) |
Bank 2 socket 1 | |
Bank 2 socket 2 | |
Bank 2 socket 3 | |
Bank 2 socket 4 | |
Bank 2 socket 5 | |
Bank 2 socket 6 | |
Bank 2 socket 7 | |
Bank 2 socket 8 |
Search Keywords |
| |
Hint Category |
Configuration, Hardware Maintenance Information | |
Date Created |
14-05-97 | |
Last Updated |
01-06-98 | |
Revision Date |
29-05-99 | |
Brand |
IBM PC Server | |
Product Family |
PC Server 704 | |
Machine Type |
8650 | |
Model |
Various | |
TypeModel |
| |
Retain Tip (if applicable) |
| |
Reverse Doclinks |