4.450 bytes

Service Hints & Tips

Document ID: RMIE-3FZGRW

Aptiva - 2136 System board connector functions

Applicable to: World-Wide

System Board Connector Functions

Connector	Function	Connect to:
CN1	Video port	Monitor
CN3	Fax/modem/voice-in connector	Fax/modem card
CN5	Internal line-in connector	Reserved
CN4	Audio-I/O card audio interface	Audio-I/O card
CN6	Riser card connector	Riser card
CN7	Video feature connector	Reserved
CN8	CD audio input connector	CD-ROM drive
CN10	Wave table upgrade interface	Audio-I/O card (with wave table)
CN11	Primary IDE connector channel	Hard disk drive
CN12	Secondary IDE connector channel	CD-ROM drive
CN13	System power connector	Power supply
CN14	Software shutdown control	Power supply
CN17	Power LED connector. Connect the white wire of power LED cable to pin-3, green wire to pin-5 by crossing pin-4.	Power LED
CN20	HDD LED connector Either connect the red wire of HDD LED cable to pin-1, white wire to pin-2, then leave pin-3 and pin-4 as non-connected; or connect the red wire of HDD LED cable to pin-4, white wire to pin-3, then leave pin-1 and pin-2 as non-connected.	HDD LED
CN21	Power switch connector This connector has no directional concern.	Power switch
FD1	Diskette connector	Diskette drive
FN1	Fan connector	CPU heat sink

	Search Keywords
	Hint Category	System Boards, Hardware Installation/Configuration
	Date Created	10-04-97
	Last Updated	10-03-99
	Revision Date	10-03-2000
	Brand	IBM Aptiva
	Product Family	Aptiva
	Machine Type	2136
	Model
	TypeModel
	Retain Tip (if applicable)
	Reverse Doclinks and Admin Purposes