6.868 bytes |
Service Hints & Tips |
Document ID: YAST-3JXNCU |
TP General - How to use and configure FaxWorks Voice
Applicable to: World-Wide
This document contains instructions on configuring and using FaxWorks Voice call center.
*How to run Call Center Quick Setup:
1. From Program Manager double click on the FaxWorks icon.
2. Double click on the Quick Setup icon.
3. Click Continue on the FaxWorks Voice 3.0 Quick Setup.
4. On the FaxWorks 3.0 Banner window fill in your name, company, fax number, on your voice phone number.
5. Click Continue.
6. On the FaxWorks 3.0 Phone Line windows, select either pulse or tone dialing.
7. Click Continue.
8. On the FaxWorks 3.0 Station ID window, enter an identifier that will be displayed by the receiving fax machine.
9. Click Continue.
10. On the FaxWorks 3.0 Current Area Code Screen, enter your current area code.
11. Click continue.
12. On the FaxWorks 3.0 Local Dial Prefix window, enter any special codes that you have to dial to reach an outside line (e.g. '9,'.)
13. Click continue.
14. On the FaxWorks 3.0 Long Distance Prefix window, enter any special codes needed to dial a long distance number. (e.g. '1' or '9,1'.)
15. Click continue.
16. On the FaxWorks 3.0 International Prefix window, enter any special dialing code needed to place an international call. Leave blank if you do not need to dial an international prefix.
17. Click continue.
18. On the FaxWorks 3.0 Country Code window, enter the country code you are calling from. For the United States, use '1'.
19. Click on continue.
20. On the FaxWorks 3.0 Toll Saver window, select whether to enable or disable the Toll Saver feature. This will cause FaxWorks to answer after a different number of rings depending on whether you have received any messages or faxes.
21. Click continue.
22. On the FaxWorks 3.0 Prompt for Fax window, select whether to enable or disable FaxWorks' prompt for Fax. When enabled, FaxWorks will play a recorded message prompting the user to press '0' on his keypad to send a fax.
23. Click continue.
24. On the FaxWorks 3.0 Prompt for Message window, select whether to enable or disable the prompt for a caller to begin
speaking after the tone.
25. Click on continue.
26. On the FaxWorks 3.0 Mailbox Name window, enter the name of the default mailbox.
27. Click OK.
28. On the FaxWorks 3.0 Mailbox Password window, enter a password for your mailbox. Re-enter it in the verify field.
29. Click OK. At this point, you will either be prompted for registration, or you will get the error in step 30. You may choose to either register FaxWorks, or to wait until later.
30. If you get a FaxWorks Registration Window with the message "A fax modem could not be found on this computer. Some possible remedies are:", then Click continue. Note: The fax modem should still function.
31. Click OK.
32. On the FaxWorks Setup Window, Click Yes to start Call Center. Otherwise click No.
*How to Start FaxWorks
Windows 3.1x:
1. From Program Manager, double click on the FaxWorks icon.
2. Double click on the Call Center Icon. FaxWorks has now been started.
Windows 95:
1. Click on the Start menu.
2. Select Programs.
3. Select FaxWorks.
4. Click on Call Center. FaxWorks has now been started.
*How to enable Automatic Reception setting in Call Center Fax Setup.
How to set the number or Rings for an incoming call.
1. Start FaxWorks Call Center.
2. Click on the Setup... button.
3. Click on the Fax Setup... button.
4. Under Receive Settings, Place mark in the box next to Automatic Reception.
5. Change the Rings Until Answer to the desired value. The default is 2.
6. Click on OK. Your have now set FaxWorks to Automatically receive faxes.
*How to set Wake On Ring:
Wake On Ring is a feature of the ThinkPad, not FaxWorks. Therefore, the setting must be changed in the ThinkPad Features
Utilities.
For the ThinkPad 755 series:
1.
- From Program Manager (Windows 3.1), double Click on the ThinkPad icon, double click on the Power icon.
- Click on the Start menu (Windows 95), select Programs, ThinkPad, Power.
2. Click on the More... button.
3. Under Resume options, place a mark next to Resume on incoming call.
4. Click OK.
5. Click OK.
For the ThinkPad 760 series:
1.
- From Program Manager Windows 3.1 double click on the ThinkPad icon, double click on ThinkPad Features.
- Click on the Start menu, select Programs, ThinkPad, ThinkPad Features.
2. Click on the Battery icon in the lower right hand corner of the window.
3. Click on the Suspend/Resume options icon (a cylinder with arrow pointing at it).
4. Under resume options, place a mark next to the Resume on incoming call.
5. Click on OK.
6. Close ThinkPad Features. You have now enabled Wake on Ring.
Search Keywords |
| |
Hint Category |
Communications | |
Date Created |
13-07-97 | |
Last Updated |
01-04-98 | |
Revision Date |
13-03-99 | |
Brand |
IBM ThinkPad | |
Product Family |
ThinkPad 701, ThinkPad 755CE/CSE, ThinkPad 755CX, ThinkPad 755CV, ThinkPad 755CD, ThinkPad 755CDV, ThinkPad 760C, ThinkPad 760E, ThinkPad 760CD, ThinkPad 760ED, ThinkPad 760XD, ThinkPad 765D | |
Machine Type |
2630, 9545, 9546 | |
Model |
Various | |
TypeModel |
| |
Retain Tip (if applicable) |
| |
Reverse Doclinks |