|
20.126 bytes |
Service Hints & Tips |
Document ID: DSHY-3QJT8D |
TP 760L/LD - Original Configuration Files SAS
Applicable to: World-Wide
These are the original configuration files for the U.S. and Canada Windows 95 preload for Thinkpad systems that come with the Advanced Communications Processor.
TP 760L/LD - Original Autoexec.Bat
(DOS and Windows 3.11)
@ECHO OFF
CLS
PROMPT $i$p$g
SET PATH=C:\DOS;C:\WINDOWS;C:\WNETFIN;C:\THINKPAD;
SET IPF_PATH=C:\IPFWIN
SET COMSPEC=C:\DOS\COMMAND.COM
SET PS2MSG=C:\THINKPAD\PS2.MSG
rem --- The following is used by DOS games to recognize Sound Blaster hardware.
rem --- If hardware settings are changed, please change this line as well.
SET BLASTER=A220 I5 D1 T1
SET TEMP=C:\WINDOWS\TEMP
SET IBMAV=C:\DOS
rem --- CD-ROM support
LOADHIGH C:\CDROM\MSCDEX.EXE /D:TPCD001 /M:15
rem --- AniVirus
CALL C:\DOS\IBMAVDR.BAT C:\DOS\
rem --- remove the OS/2 swapper file, not needed for DOS/Windows
IF EXIST c:\Swap\Swapper.dat Del c:\Swap\Swapper.dat
rem --- The following line is for automatic hibernation file maintenance
C:\THINKPAD\PS2 HFILE C
rem --- The following line is for DOS mouse support
LOADHIGH C:\DOS\MOUSE.COM /Y
rem --- Un'REM' the following line to enable the DOS fuel gauge
rem --- LOADHIGH C:\THINKPAD\FUELDOS.COM
rem To disable write caching, remove '+' from the following line
C:\DOS\SMARTDRV.EXE C+
LOADHIGH C:\DOS\DOSKEY.COM
Call c:\windows\temp\chkmod.bat
CALL WIN
(OS/2 Warp DOS Mode)
@ECHO OFF
ECHO.
PROMPT $i$p$g
REM SET DELDIR=C:\DELETE,512;D:\DELETE,512;
PATH=C:\OS2;C:\OS2\MDOS;C:\;C:\WINDOWS;c:\tcpip\dos\bin;
LOADHIGH APPEND C:\OS2;C:\OS2\SYSTEM
SET TMP=C:\
REM LOADHIGH DOSKEY FINDFILE=DIR /A /S /B $*
REM DOSKEY EDIT=QBASIC/EDITOR $*
REM SET DIRCMD=/A
SET TEMP=C:\WINDOWS\TEMP
COPY C:\WINDOWS\WINOS2.COM C:\WINDOWS\WIN.COM > NUL
@SET ETC=c:\tcpip\dos\etc
TP 760L/LD - Original Config.Sys
(DOS and Windows 3.11)
DEVICE=C:\DOS\HIMEM.SYS /FASTA20
DOS=HIGH,UMB
DOSDATA=UMB
FILES=30
BUFFERS=10
STACKS=9,256
SHELL=C:\DOS\COMMAND.COM /P /E:512 /H
DEVICE=C:\DOS\EMM386.EXE NOEMS MOVEXBDAHI I=B000-B7FF X=C800-CFFF
rem --- The following line is for CD-ROM support
DEVICEHIGH=C:\CDROM\IBMTPCD.SYS /R
rem --- The following line is for specific DOS version support
DEVICEHIGH=C:\DOS\SETVER.EXE
rem --- The following lines are for PCMCIA support
DEVICEHIGH=C:\THINKPAD\IBMDSS01.SYS /D
DEVICEHIGH=C:\THINKPAD\IBMDOSCS.SYS
DEVICEHIGH=C:\THINKPAD\DICRMU01.SYS /SH=1 /MA=C800-CFFF
DEVICEHIGH=C:\DOS\POWER.EXE
DEVICEHIGH=C:\THINKPAD\$ICPMDOS.SYS
DEVICEHIGH=C:\THINKPAD\AUTODRV.SYS
rem --- remove the 'rem' for PCMCIA SRAM card support
rem DEVICEHIGH=C:\THINKPAD\IBMDSCSE.SYS
rem --- remove the 'rem' for PCMCIA FLASH card support
rem DEVICEHIGH=C:\THINKPAD\FLSHDMTD.SYS
rem --- remove the 'rem' for PCMCIA ATA card support
rem DEVICEHIGH=C:\THINKPAD\PAWATASF.SYS /NOBEEP
(OS/2 Warp)
REM --- High Performance File System Driver
REM IFS=C:\OS2\HPFS.IFS /CACHE:64 /CRECL:4
PROTSHELL=C:\OS2\PMSHELL.EXE
SET USER_INI=C:\OS2\OS2.INI
SET SYSTEM_INI=C:\OS2\OS2SYS.INI
SET OS2_SHELL=C:\OS2\CMD.EXE
SET AUTOSTART=TASKLIST,FOLDERS,LAUNCHPAD
SET RESTARTOBJECTS=STARTUPFOLDERSONLY
SET RUNWORKPLACE=C:\OS2\PMSHELL.EXE
SET COMSPEC=C:\OS2\CMD.EXE
LIBPATH=.;C:\OS2\DLL;C:\OS2\MDOS;C:\;C:\OS2\APPS\DLL;C:\MMOS2\DLL;c:\tcpip\dll;C:\TCPIP\UMAIL;C:\VIEWER\DLL;C:\NETFIN;
SET PATH=C:\OS2;C:\OS2\SYSTEM;C:\OS2\INSTALL;C:\;C:\OS2\MDOS;C:\OS2\APPS;C:\WINDOWS;C:\MMOS2;c:\tcpip\bin;C:\TCPIP\UMAIL;C:\VIEWER\BIN;C:\NETFIN;
SET DPATH=C:\OS2;C:\OS2\SYSTEM;C:\OS2\INSTALL;C:\;C:\OS2\BITMAP;C:\OS2\MDOS;C:\OS2\APPS;C:\WINDOWS;C:\MMOS2;C:\MMOS2\INSTALL;C:\VIEWER\DATA;C:\NETFIN;
BASEDEV=DETNE2.SYS
SET PROMPT=$i[$p]
SET HELP=C:\OS2\HELP;C:\OS2\HELP\TUTORIAL;C:\MMOS2\HELP;c:\tcpip\help;C:\TCPIP\UMAIL;C:\VIEWER\HELP;
SET GLOSSARY=C:\OS2\HELP\GLOSS;
SET IPF_KEYS=SBCS
PRIORITY_DISK_IO=NO
FILES=30
BASEDEV=IBMKBD.SYS
DEVICE=C:\OS2\BOOT\TESTCFG.SYS
DEVICE=C:\OS2\BOOT\DOS.SYS
DEVICE=C:\OS2\BOOT\PMDD.SYS
BUFFERS=90
IOPL=YES
DISKCACHE=512,LW,64,AC:C
MAXWAIT=2
MEMMAN=SWAP,PROTECT
SWAPPATH=C:\SWAP 4096 24576
BREAK=OFF
THREADS=256
PRINTMONBUFSIZE=2048,134,134
COUNTRY=001,C:\OS2\SYSTEM\COUNTRY.SYS
SET KEYS=ON
SET BOOKSHELF=C:\OS2\BOOK;C:\MMOS2;
SET SOMIR=C:\OS2\ETC\SOM.IR;C:\OS2\ETC\WPSH.IR;C:\OS2\ETC\WPDSERV.IR
SET SOMDDIR=C:\OS2\ETC\DSOM
REM --- enable undelete
REM SET DELDIR=C:\DELETE,512;
BASEDEV=PRINT01.SYS
BASEDEV=IBM1FLPY.ADD
REM --- Micro Channel diskette drive support
REM BASEDEV=IBM2FLPY.ADD
BASEDEV=IBM1S506.ADD
BASEDEV=XDFLOPPY.FLT
BASEDEV=OS2DASD.DMD
SET EPMPATH=C:\OS2\APPS;
PROTECTONLY=NO
SHELL=C:\OS2\MDOS\COMMAND.COM C:\OS2\MDOS
FCBS=16,8
RMSIZE=640
DEVICE=C:\OS2\MDOS\VEMM.SYS
DOS=HIGH,UMB
DEVICE=C:\OS2\MDOS\VXMS.SYS /UMB
DEVICE=C:\OS2\MDOS\VDPMI.SYS
DEVICE=C:\OS2\MDOS\VDPX.SYS
DEVICE=C:\OS2\MDOS\VWIN.SYS
DEVICE=C:\OS2\MDOS\VW32S.SYS
DEVICE=C:\OS2\BOOT\APM.SYS
DEVICE=C:\OS2\MDOS\VAPM.SYS
REM --- for CD-ROM support
DEVICE=C:\OS2\BOOT\OS2CDROM.DMD /Q
IFS=C:\OS2\BOOT\CDFS.IFS /Q
DEVICE=C:\OS2\MDOS\VCDROM.SYS
BASEDEV=IBMIDECD.FLT
REM --- CD-ROM support end
REM --- for SCSI install support
REM BASEDEV=OS2SCSI.DMD
REM BASEDEV=AHA152X.ADD
REM SCSI support end
DEVICE=C:\OS2\MDOS\VMOUSE.SYS
DEVICE=C:\OS2\BOOT\POINTDD.SYS
DEVICE=C:\OS2\BOOT\MOUSE.SYS
REM --- for PCMCIA SRAM/ATA/FLASH card support
BASEDEV=PCMCIA.SYS
BASEDEV=IBM2SS01.SYS /D
BASEDEV=AUTODRV2.SYS
DEVICE=C:\THINKPAD\VPCMCIA.SYS
REM DEVICE=C:\THINKPAD\PCMSSDIF.SYS
REM DEVICE=C:\THINKPAD\PCM2SRAM.SYS
REM DEVICE=C:\THINKPAD\FLSH2MTD.SYS
REM DEVICE=C:\THINKPAD\PCM2FLSH.SYS
REM BASEDEV=PCM2ATA.ADD /S:2 /!DM /NOBEEP
REM --- PCMCIA SRAM/ATA/FLASH card support end
DEVICE=C:\OS2\BOOT\COM.SYS
DEVICE=C:\OS2\MDOS\VCOM.SYS
CODEPAGE=437,850
DEVINFO=KBD,US,C:\OS2\KEYBOARD.DCP
DEVINFO=SCR,VGA,C:\OS2\BOOT\VIOTBL.DCP
SET MMBASE=C:\MMOS2;
SET DSPPATH=C:\MMOS2\DSP;
SET NCDEBUG=4000
DEVICE=C:\MMOS2\SSMDD.SYS
DEVICE=C:\MMOS2\R0STUB.SYS
BASEDEV=OS2PCARD.DMD
DEVICE=C:\THINKPAD\$ICPMOS2.SYS
SET VIDEO_DEVICES=VIO_SVGA
SET VIO_SVGA=DEVICE(BVHVGA,BVHSVGA)
DEVICE=C:\OS2\MDOS\VSVGA.SYS
DEVICE=C:\OS2\MDOS\WINOS2\IBMIRVDD.SYS
BASEDEV=AODBSMD.SYS
REM FaxFaxFaxFaxFax -- Please do not modify this group of lines
IOPL=FxPrint
DEVICE=C:\FaxWOS2\Fmd.sys L
REM FaxFaxFaxFaxFax -- FaxWorks for OS/2
REM --- The following lines are for TCP/IP support
SET ETC=c:\tcpip\etc
SET TMP=c:\tcpip\tmp
DEVICE=c:\tcpip\bin\inet.sys
DEVICE=c:\tcpip\bin\ifndisnl.sys
DEVICE=c:\tcpip\bin\vdostcp.vdd
DEVICE=c:\tcpip\bin\vdostcp.sys
RUN=c:\tcpip\bin\cntrl.exe
RUN=c:\tcpip\bin\vdosctl.exe
REM --- TCP/IP support end
SET UMPATH=C:\VIEWER\DATA;
SET WORKPLAC=C:\VIEWER
SET VIEWER=C:\VIEWER
DEVICE=C:\NETFIN\SYSINFO.SYS
BASEDEV=NFDASD.FLT
DEVICE=C:\MMOS2\TIMER0.SYS
DEVICE=C:\MMOS2\ES1688DD.SYS /B:220 /D:1 /I:5 /N:ES16881$
DEVICE=C:\MMOS2\VAUDDRV.SYS ES16881$
TP 760L/LD - Original System.Ini (Windows 3.1)
[boot]
386grabber=VGADIB.3GR
oemfonts.fon=vgaoem.fon
286grabber=VGACOLOR.2GR
fixedfon.fon=vgafix.fon
fonts.fon=vgasys.fon
display.drv=CYBW31H.DRV
shell=progman.exe
mouse.drv=mouse.drv
network.drv=
language.dll=
sound.drv=mmsound.drv
comm.drv=comm.drv
keyboard.drv=keyboard.drv
system.drv=atmsys.drv
SCRNSAVE.EXE=(None)
MAVDMApps=
os2mouse.drv=mouse.drv
atm.system.drv=system.drv
useos2shield=1
os2shield=winsheld.exe
os2fonts.fon=vgasys.fon
fdisplay.drv=CYBW31HF.DRV
sdisplay.drv=CYBW31HS.DRV
drivers=mmsystem.dll power.drv msmixmgr.dll
[keyboard]
subtype=
type=4
keyboard.dll=
oemansi.bin=
[boot.description]
sdisplay.drv=Trident WIN-OS/2 640x480x256
aspect=100,96,96
displayinf=OEM0.INF
display.drv=Cyber9320 640x480 256 small fonts
keyboard.typ=Enhanced 101 or 102 key US and Non US keyboards
mouse.drv=Microsoft, or IBM PS/2
network.drv=No Network Installed
language.dll=English (American)
system.drv=MS-DOS System with APM
codepage=437
woafont.fon=English (437)
fdisplay.drv=Trident WIN-OS/2 640x480x256
[386Enh]
device=es1688wn.386
device=C:\TRANXIT\pumair.386
device=C:\TRANXIT\pcomm.386
device=dva.386
; ***PCMCIA PARAMETERS START***DO NOT EDIT OR DELETE THIS LINE!***
EMMExclude=C800-CFFF
; ***PCMCIA PARAMETERS END***DO NOT EDIT OR DELETE THIS LINE!***
32BitDiskAccess=off
device=*int13
device=wdctrltp.386
device=IBMIR.386
display=CYBVDD31.386
EGA80WOA.FON=EGA80WOA.FON
EGA40WOA.FON=EGA40WOA.FON
CGA80WOA.FON=CGA80WOA.FON
CGA40WOA.FON=CGA40WOA.FON
;======== PC DOS 7 Setup Modification - Begin ========
device=C:\DOS\SYSTEM\CPBVXD.386
;======== PC DOS 7 Setup Modification - End ========
mouse=*vmd
network=*dosnet,*vnetbios
device=vpowerd.386
ebios=*ebios
woafont=dosapp.fon
keyboard=*vkd
device=vtdapi.386
device=*vpicd
device=vtda.386
device=*reboot
device=*vdmad
device=*vsd
device=*v86mmgr
device=*pageswap
device=*dosmgr
device=*vmpoll
device=*wshell
device=*BLOCKDEV
device=*PAGEFILE
device=*vfd
device=*parity
device=*biosxlat
; device=*vcd
device=*vmcpd
device=*combuff
device=*cdpscsi
local=CON
FileSysChange=off
PagingFile=C:\WINDOWS\WIN386.SWP
MaxPagingFileSize=28672
VDDFreeB000=YES
DEVICE=C:\DOS\MONOUMB.386
DMABUFFERSIZE=018
EMMexclude=C800-CFFF
DEVICE=IBMPNP.386
device=IBMVCD.386
; If COM_BDA_VIRTUAL=true, virtualize BIOS Data area 40:0 -- 40:8
COM_BDA_VIRTUAL=FALSE
COMVerifyBase=false
COM1Base=3F8
COM2Base=2F8
COM3Base=3E8
COM4Base=2E8
COM1IRQ=4
COM2IRQ=3
COM3IRQ=4
COM4IRQ=3
NetHeapSize=32
device=nfvd.386
[standard]
[NonWindowsApp]
localtsrs=dosedit,ced
[mci]
WaveAudio=mciwave.drv 4
Sequencer=mciseq.drv
AVIVideo=mciavi.drv
CDAudio=mcicda.drv
[drivers]
WAVE=es1688wn.drv
MIDI=es1688wn.drv
AUX=es1688wn.drv
MIXER=es1688wn.drv
MIDI1=audmpu.drv
timer=timer.drv
midimapper=midimap.drv
VIDC.IV32=ir32.dll
VIDC.IV31=ir32.dll
VIDC.RT21=ir21.dll
VIDC.YVU9=iyvu9.dll
VIDC.CVID=iccvid.drv
VIDC.MSVC=msvidc.drv
VIDC.MRLE=MSRLE.drv
WaveMapper=msacm.drv
MSACM.msadpcm=msadpcm.acm
MSACM.imaadpcm=imaadpcm.acm
[timer.drv]
TIMERMax386Res=8
TIMERMax286Res=8
[mciseq.drv]
disablewarning=true
; device=*vcd
; If COM_BDA_VIRTUAL=true, virtualize BIOS Data area 40:0 -- 40:8
[Cyber9320]
LCDResolution=640x480
CRTResolution=640x480
VirtualScreen=No
ColorDepth=8
ResolutionChange=No
ResourceSize=Small
[auddrive.drv]
mpu401=yes
AudioDrive=ES1688
Synth=OPL3
portchoices=220,230,240,250
irqchoices=2,5,7,10
dmachoices=0,1,3
port=220
int=5
dmachannel=1
portchoicesMPU401=300,310,320,330
irqchoicesMPU401=2,5,7,10,11
portMPU401=300
intMPU401=7
AutoConfig=yes
VerifyInt=yes
VerifyDMA=no
Mute=No
MutePCspk=No
VolumeMutes=4
VolumeMixer=31
WaveInMixer=2
VoiceMixer=2
WaveInMonitor=No
VoiceMonitor=No
VolumeMaster=32768
VolumeMasterR=32768
VolumeWave=32768
VolumeWaveR=32768
VolumeSynth=32768
VolumeSynthR=32768
VolumeLine=32768
VolumeLineR=32768
VolumeMic=32768
VolumeMicR=32768
VolumeCD=32768
VolumeCDR=32768
VolumeAuxB=32768
VolumeAuxBR=32768
VolumePCspk=32768
WaveInMic=32768
WaveInMicR=32768
WaveInLine=32768
WaveInLineR=32768
WaveInCD=32768
WaveInCDR=32768
WaveInSynth=32768
WaveInSynthR=32768
WaveInAuxB=32768
WaveInAuxBR=32768
WaveInMaster=32768
WaveInMasterR=32768
VoiceMic=32768
VoiceMicR=32768
VoiceLine=32768
VoiceLineR=32768
VoiceCD=32768
VoiceCDR=32768
VoiceAuxB=32768
VoiceAuxBR=32768
VoiceMaster=32768
VoiceMasterR=32768
VOICEMASTERR
TP 770 - Original Win.Ini (Windows 95)
[windows]
spooler=yes
load=c:\screens\strtscr.exe
run=C:\THINKPAD\LRGPTR.EXE
Beep=yes
NullPort=None
BorderWidth=3
CursorBlinkRate=530
DoubleClickSpeed=452
Programs=com exe bat pif
Documents=
DeviceNotSelectedTimeout=15
TransmissionRetryTimeout=45
KeyboardDelay=2
KeyboardSpeed=31
ScreenSaveActive=0
ScreenSaveTimeOut=120
device=IBM Proprinter,proprint,LPT1:
CoolSwitch=1
[Desktop]
Pattern=(None)
Wallpaper=thinkpad.bmp
GridGranularity=0
IconSpacing=65
TileWallPaper=1
[Extensions]
cal=calendar.exe ^.cal
crd=cardfile.exe ^.crd
trm=terminal.exe ^.trm
txt=notepad.exe ^.txt
ini=notepad.exe ^.ini
pcx=pbrush.exe ^.pcx
bmp=pbrush.exe ^.bmp
wri=write.exe ^.wri
rec=recorder.exe ^.rec
hlp=winhelp.exe ^.hlp
;======== PC DOS 7 Setup Modification - Begin ========
set=C:\DOS\WNBACKUP.EXE ^.set
;======== PC DOS 7 Setup Modification - End ========
[intl]
sLanguage=enu
sCountry=United States
iCountry=1
iDate=0
iTime=0
iTLZero=0
iCurrency=0
iCurrDigits=2
iNegCurr=0
iLzero=1
iDigits=2
iMeasure=1
s1159=AM
s2359=PM
sCurrency=$
sThousand=,
sDecimal=.
sDate=/
sTime=:
sList=,
sShortDate=M/d/yy
sLongDate=dddd, MMMM dd, yyyy
[ports]
; A line with [filename].PRN followed by an equal sign causes
; [filename] to appear in the Control Panel's Printer Configuration dialog
; box. A printer connected to [filename] directs its output into this file.
LPT1:=
LPT2:=
LPT3:=
COM1:=9600,n,8,1,x
COM2:=9600,n,8,1,x
COM3:=9600,n,8,1,x
COM4:=9600,n,8,1,x
EPT:=
FILE:=
LPT1.DOS=
LPT2.DOS=
LPT1.OS2=
LPT2.OS2=
LPT3.OS2=
[FontSubstitutes]
Helv=MS Sans Serif
Tms Rmn=MS Serif
Times=Times New Roman
Helvetica=Arial
[TrueType]
[mci extensions]
wav=waveaudio
mid=sequencer
rmi=sequencer
avi=AVIVideo
[Compatibility]
NOTSHELL=0x0001
WPWINFIL=0x0006
CCMAIL=0x0008
AMIPRO=0x0010
REM=0x8022
PIXIE=0x0040
CP=0x0040
JW=0x42080
TME=0x0100
VB=0x0200
WIN2WRS=0x1210
PACKRAT=0x0800
VISION=0x0040
MCOURIER=0x0800
_BNOTES=0x24000
MILESV3=0x1000
PM4=0x2000
DESIGNER=0x2000
PLANNER=0x2000
DRAW=0x2000
WINSIM=0x2000
CHARISMA=0x2000
PR2=0x2000
PLUS=0x1000
ED=0x00010000
APORIA=0x0100
EXCEL=0x1000
GUIDE=0x1000
NETSET2=0x0100
W4GL=0x4000
W4GLR=0x4000
TURBOTAX=0x00080000
[Microsoft Word 2.0]
HPDSKJET=+1
[fonts]
Modern (Plotter)=MODERN.FON
Script (Plotter)=SCRIPT.FON
Roman (Plotter)=ROMAN.FON
Small Fonts (VGA res)=SMALLE.FON
Small Fonts (vga res)=smalle.fon
MS Scans Serif 8,10,12,14,18,24 (vga res)=sserife.fon
Courier 10,12,15 (vga res)=coure.fon
MS Serif 8,10,12,14,18,24 (vga res)=serife.fon
Symbol 8,10,12,14,18,24 (vga res)=symbole.fon
Symbol 8,10,12,14,18,24 (VGA res)=SYMBOLE.FON
MS Serif 8,10,12,14,18,24 (VGA res)=SERIFE.FON
Courier 10,12,15 (VGA res)=COURE.FON
MS Sans Serif 8,10,12,14,18,24 (VGA res)=SSERIFE.FON
Arial (TrueType)=ARIAL.FOT
Arial Bold (TrueType)=ARIALBD.FOT
Arial Bold Italic (TrueType)=ARIALBI.FOT
Arial Italic (TrueType)=ARIALI.FOT
Courier New (TrueType)=COUR.FOT
Courier New Bold (TrueType)=COURBD.FOT
Courier New Bold Italic (TrueType)=COURBI.FOT
Courier New Italic (TrueType)=COURI.FOT
Times New Roman (TrueType)=TIMES.FOT
Times New Roman Bold (TrueType)=TIMESBD.FOT
Times New Roman Bold Italic (TrueType)=TIMESBI.FOT
Times New Roman Italic (TrueType)=TIMESI.FOT
WingDings (TrueType)=WINGDING.FOT
Symbol (TrueType)=SYMBOL.FOT
[embedding]
SoundRec=Sound,Sound,SoundRec.exe,picture
Package=Package,Package,packager.exe,picture
PBrush=Paintbrush Picture,Paintbrush Picture,pbrush.exe,picture
MPlayer=Media Clip,Media Clip,mplayer.exe,picture
[pcdos]
;======== PC DOS 7 Setup Modification - Begin ========
pcdos=C:\DOS\DATA\WNUSER.INI
;======== PC DOS 7 Setup Modification - End ========
[spooler]
window=22 22 614 386
[PrinterPorts]
HP LaserJet=HPPCL,LPT1:,15,45
IBM Laser Printer 4019=ibm4019,LPT1:,15,45
IBM Proprinter=proprint,LPT1:,15,45
[devices]
HP LaserJet=HPPCL,LPT1:
IBM Laser Printer 4019=ibm4019,LPT1:
IBM Proprinter=proprint,LPT1:
[PSCRIPT]
External Printers=6
Printer1=40291760
Printer2=40291730
Printer3=40293930
Printer4=40293960
Printer5=IBM17521
Printer6=IBM39521
[LRGPTR]
Icon=ON
Style=1
[drawdib]
cybw31h.drv 640x480x8(5)=27,0,0,0
[sounds]
SystemAsterisk=chord.wav,Asterisk
SystemHand=chord.wav,Critical Stop
SystemDefault=ding.wav,Default Beep
SystemExclamation=chord.wav,Exclamation
SystemQuestion=chord.wav,Question
SystemExit=chimes.wav,Windows Exit
SystemStart=C:\WINDOWS\TADA.WAV,Windows Start
WinCIM Terminate HMI=,WinCIM Terminate HMI
WinCIM ENS Notice=,WinCIM ENS Notice
WinCIM Forum Notice=,WinCIM Forum Notice
WinCIM Host Disconnect=,WinCIM Host Disconnect
WinCIM Enter CB=,WinCIM Enter CB
WinCIM Enter ENS=,WinCIM Enter ENS
WinCIM Enter Forum=,WinCIM Enter Forum
WinCIM Leave CB=,WinCIM Leave CB
WinCIM Leave ENS=,WinCIM Leave ENS
WinCIM Leave Forum=,WinCIM Leave Forum
WinCIM Wait Message=,WinCIM Wait Message
WinCIM Forum Messages=C:\CSERVE\support\wcformes.wav,WinCIM Forum Messages
WinCIM Get New Mail=C:\CSERVE\support\wcgetmai.wav,WinCIM Get New Mail
WinCIM Exit=C:\CSERVE\support\wcexit.wav,WinCIM Exit
WinCIM Start=C:\CSERVE\support\wcstart.wav,WinCIM Start
WinCIM Inactive Talk=C:\CSERVE\support\wcinact.wav,WinCIM Inactive Talk
WinCIM Invitation=C:\CSERVE\support\wcinvite.wav,WinCIM Group Invitation
WinCIM Async Message=C:\CSERVE\support\wcasyn.wav,WinCIM Async Message
WinCIM What's New=C:\CSERVE\support\wcwhtnew.wav,WinCIM What's New
WinCIM Forum Conf=C:\CSERVE\support\wcforcon.wav,WinCIM Conference in Progress
[PRODIGY]
DIR=C:\PRODIGY
[GO]
Executable=C:\CSERVE\wincim\wincim.exe C:\CSERVE\wincim\wincim.ini
[Windows Help]
H_WindowPosition=[213,160,213,160,0]
[MSWrite]
Backup=0
|
Search Keywords |
| |
|
Hint Category |
Configuration | |
|
Date Created |
10-12-97 | |
|
Last Updated |
01-04-98 | |
|
Revision Date |
14-03-99 | |
|
Brand |
IBM ThinkPad | |
|
Product Family |
ThinkPad 760L/LD | |
|
Machine Type |
9546, 9547 | |
|
Model |
Various | |
|
TypeModel |
| |
|
Retain Tip (if applicable) |
| |
|
Reverse Doclinks |