3.282 bytes |
Service Hints & Tips |
Document ID: LWIK-3VWRK6 |
TP 380XD,385XD,560X,600,770/E/ED - Installing USB support after reloading from CABS directory
Applicable to: World-Wide
SYMPTOM:
After reinstalling Windows 95 from the CABS directory on to a formatted C hard drive, the USB support is not enabled. This will usually occur when the CABS directory is copied over to the D drive and the C drive is then formatted to free up space.
CONFIGURATION:
Any ThinkPad with USB support preloaded with Windows 95.
SOLUTION:
To enable USB support:
1. Go to Control Panel, Add/Remove programs
2. On the Install/Uninstall tab select the Install button
3. Select Next
4. On the 'Command line for installation program type in:
D:\cabs\USBSUPP.EXE
Answer Yes to the following prompts to Install USB support
5. Reboot
6. Copy the file USB.INF from D:\CABS to C:\WINDOWS\INF overwriting the existing file.
7. Copy the file UHCD.SYS from D:\CABS to C:\WINDOWS\SYSTEM overwriting the existing file.
8. Go to System Properties, Device Manager
9. Select the ? icon listed as Unknown devices and click the REMOVE button.
10. Follow the prompts and reboot.
After system restarts, go to Device Manager and verify USB support is enabled. You should see a section titled: Universal serial bus controller. There you should see two devices listed:
Intel 82371AB PCI to USB Universal Host Controller (this may vary by machine in some cases)
USB Root Hub
Search Keywords |
| |
Hint Category |
Windows 95 | |
Date Created |
29-06-98 | |
Last Updated |
28-01-99 | |
Revision Date |
28-01-2000 | |
Brand |
IBM ThinkPad | |
Product Family |
ThinkPad 380, ThinkPad 380D, ThinkPad 380E, ThinkPad 380ED, ThinkPad 380XD, ThinkPad 380Z, ThinkPad 385D, ThinkPad 385E, ThinkPad 385ED, ThinkPad 385XD, ThinkPad 560X, ThinkPad 560Z, ThinkPad 600, ThinkPad 600E, ThinkPad 770, ThinkPad 770E/ED | |
Machine Type |
2635, 2636, 2640, 2641, 2645, 2646, 9548, 9549, 9544 | |
Model |
Various | |
TypeModel |
| |
Retain Tip (if applicable) |
| |
Reverse Doclinks |